FTR, the reason I did the firmware updates was so I could move to SNMPv3 monitoring. I made that change about two hours ago and haven't seen a COMMBAD message since so perhaps this problem is solved.
Perhaps. nomad On Mon, Jul 17, 2023 at 8:02 AM Lee Damon <[email protected]> wrote: > For all the details I put in this I realized I forgot to mention we are > using SNMPv1 for this UPS. > > nomad > > On Fri, Jul 14, 2023 at 3:37 PM Lee Damon <[email protected]> wrote: > >> I'm running nut-2.8.0-3.el8.x86_64 on CentOS Stream 8 talking with an >> APC Smart-UPS RT 5000 RM XL via a Network Management Card AP9619 (version >> A10). Up to today I would receive occasional COMMBAD messages, then 5 >> minutes later I'd see a COMMOK.Maybe 1 or two a day. >> >> Today I updated the firmware on the AP9619 from 3.7.2 to SUMX 3.9.3 and >> AOX 3.9.4, the most recent releases available for the card. >> >> Now I am seeing COMMBAD, then a minute later COMMOK, roughly every 3-6 >> minutes. I don't think it's a network problem: >> >> 1000 packets transmitted, 999 received, 0.1% packet loss, time 1000727ms >> rtt min/avg/max/mdev = 2.503/3.554/78.377/2.519 ms >> >> So, is there something I can do to figure out what's going on or failing >> that is there a setting I can tweak that says "If you lose comm with the >> UPS, wait 6 minutes before complaining about it"? >> >> thanks, >> nomad >> >
_______________________________________________ Nut-upsuser mailing list [email protected] https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsuser
