Hi, i run NUT on a Raspberry Pi 3 Model B and after the latest OS Update i get the following Error from KFENCE, the current OS Version is the first with KFENCE so it possible that this Problem has was always existing.
[21963.079554] ================================================================== [21963.079580] BUG: KFENCE: memory corruption in free_async+0x1d8/0x1e0 [21963.079580] [21963.079604] Corrupted memory at 0x0000000025448a9e [ ! ! ! . . . . . . . . . . . . . ] (in kfence-#183): [21963.079711] free_async+0x1d8/0x1e0 [21963.079728] usbdev_ioctl+0x138/0x1c40 [21963.079744] __arm64_sys_ioctl+0xd0/0x130 [21963.079769] invoke_syscall+0x7c/0x130 [21963.079793] el0_svc_common.constprop.0+0x6c/0x160 [21963.079815] do_el0_svc+0x38/0x120 [21963.079835] el0_svc+0x34/0xc0 [21963.079856] el0t_64_sync_handler+0x11c/0x150 [21963.079876] el0t_64_sync+0x198/0x19c [21963.079892] [21963.079899] kfence-#183: 0x0000000070088b17-0x00000000bed184b6, size=5, cache=kmalloc-128 [21963.079899] [21963.079916] allocated by task 1647 on cpu 2 at 21963.076359s: [21963.079946] proc_do_submiturb+0xdb0/0x1000 [21963.079962] usbdev_ioctl+0x12c0/0x1c40 [21963.079977] __arm64_sys_ioctl+0xd0/0x130 [21963.079999] invoke_syscall+0x7c/0x130 [21963.080019] el0_svc_common.constprop.0+0x6c/0x160 [21963.080040] do_el0_svc+0x38/0x120 [21963.080060] el0_svc+0x34/0xc0 [21963.080078] el0t_64_sync_handler+0x11c/0x150 [21963.080097] el0t_64_sync+0x198/0x19c [21963.080111] [21963.080117] freed by task 1647 on cpu 2 at 21963.079503s: [21963.080155] free_async+0x1d8/0x1e0 [21963.080170] usbdev_ioctl+0x138/0x1c40 [21963.080184] __arm64_sys_ioctl+0xd0/0x130 [21963.080206] invoke_syscall+0x7c/0x130 [21963.080226] el0_svc_common.constprop.0+0x6c/0x160 [21963.080247] do_el0_svc+0x38/0x120 [21963.080267] el0_svc+0x34/0xc0 [21963.080285] el0t_64_sync_handler+0x11c/0x150 [21963.080304] el0t_64_sync+0x198/0x19c [21963.080318] [21963.080327] CPU: 2 PID: 1647 Comm: usbhid-ups Tainted: G C O 6.1.63 #1 [21963.080345] Hardware name: Raspberry Pi 3 Model B Rev 1.2 (DT) [21963.080354] ================================================================== The UPS is an Cyber Power Systems BR700ELCD with the following driver configuration driver = usbhid-ups port = /dev/ttyUSB0 desc = "BR700ELCD" pollinterval=10 pollfreq=15 Is that an Configuration ore Hardware issue? Kind regards Dirk
_______________________________________________ Nut-upsuser mailing list [email protected] https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsuser
