Hi there,
Question: Is there anywhere a description of how to use the settings for shutdown options in Windows NUT client ? i have successfully set up NUT on a Raspberry which gathers data from a CyberPower CP1500EPFCLCD. Have also connected 2 Windows 11 machines and one Synology device tot hat master, in order read data and to react on powersupply issues. All working fine. What i am struggeling with are the settings available in Windows NUT Client about the Shutdown options. My first trial to get the system to hibernate after a power failure was not successful. Seems to be different possible settings which may confuse each other. Is there anywhere a description of how to use the settings for shutdown options in Windows NUT client ? Current setting see screenshot As nothing happened, i did set the first value for battery-threshold to 90%, (while the batt was below) and that then did immediately react with hiberate. My preferred setting would be to wait after powerfailure for 1 minute, then hibernate. Without taking other values into account like batterylevel or batteryruntime. Any help or information on that would be appreciated. Thanks Eddie
_______________________________________________ Nut-upsuser mailing list [email protected] https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsuser
