Am i the only user who has no glue about how to build a new version for my system?
Im running on Raspberry GNU/Linux (bullseye) v 11, which might be similar to your system? Sounds as if it is not a big issue to download the version and build it and install it. Is there anybody out there who might be able to give me a kickoff, how to do that? Have found various built versions here at Binary packages - Debian packages https://packages.debian.org/search?keywords=nut but using 2.8.0.7 did install the newer nut, but nut-client and nut-server were again 2.7.4. using nut-client and nut-server standalone and of newer versions did refuse to install Von: Nut-upsuser <nut-upsuser-bounces+edward.ebay=t-online...@alioth-lists.debian.net> Im Auftrag von Dan Grostick via Nut-upsuser Gesendet: Mittwoch, 6. März 2024 08:36 An: [email protected]; Andy Smith <[email protected]> Betreff: Re: [Nut-upsuser] Upssched 100% CPU Thanks for the tip. I had downloaded a prerelease source version of NUT 2.8.1, built and installed it. Evidently there was an issue with upssched consuming 100% CPU. I downloaded the current release and the issue has been resolved. Updating all 3 systems. Dan _____ From: Nut-upsuser <nut-upsuser-bounces+danpower2023=outlook....@alioth-lists.debian.net <mailto:nut-upsuser-bounces+danpower2023=outlook....@alioth-lists.debian.net > > on behalf of Andy Smith via Nut-upsuser <[email protected] <mailto:[email protected]> > Sent: Tuesday, March 5, 2024 6:43 AM To: [email protected] <mailto:[email protected]> <[email protected] <mailto:[email protected]> > Subject: Re: [Nut-upsuser] Upssched 100% CPU Hi, On Tue, Mar 05, 2024 at 08:37:32AM +0000, Dan Grostick via Nut-upsuser wrote: > My Raspberry PI 3B was overheating - 70 degrees C. I used Top and > it turns out that upssched is taking 100% CPU. Debian 11 (PI Os). > I have two others running the same configuration, 2.8.1 with no > problems. I have no first hand knowledge of this issue, but in the change log for the 2.8.1 release: https://networkupstools.org/historic/v2.8.1/docs/release-notes.chunked/NUT_R elease_Notes.html#_release_notes_for_nut_2_8_1_what_8217_s_new_since_2_8_0 A bug in upssched was discovered and fixed, where it ran a tight loop stressing the CPU; it was presumably introduced between NUT v2.7.4 and v2.8.0 releases [#1964, #1965] I expect your Debian 11 Pi OS does not have 2.8.1, so maybe try that version? Thanks, Andy -- https://bitfolk.com/ -- No-nonsense VPS hosting _______________________________________________ Nut-upsuser mailing list [email protected] <mailto:[email protected]> https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsuser
_______________________________________________ Nut-upsuser mailing list [email protected] https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsuser
