Hi folks, I'm having an issue with getting nut-server to start at boot on a freshly installed Fedora 40 desktop. Seems once the machine is up, I can manually start with systemctl start nut-server and everythings fine.
dnf info nut Last metadata expiration check: 2:08:11 ago on Sat 27 Jul 2024 03:48:13 PM EDT. Installed Packages Name : nut Version : 2.8.2 Release : 1.fc40 Architecture : x86_64 Size : 12 M Source : nut-2.8.2-1.fc40.src.rpm Repository : @System >From repo : updates Summary : Network UPS Tools URL : https://www.networkupstools.org/ License : GPL-2.0-or-later AND GPL-3.0-or-later Description : These programs are part of a developing project to monitor the assortment : of UPSes that are found out there in the field. Many models have serial : ports of some kind that allow some form of state checking. This : capability has been harnessed where possible to allow for safe shutdowns, : live status tracking on web pages, and more. I've tried with specific LISTEN lines in upsd.conf, also tried without one specified. Same result, service doesn't start at boot. No apparent errors reported either: systemctl status nut-server ○ nut-server.service - Network UPS Tools - power devices information server Loaded: loaded (/usr/lib/systemd/system/nut-server.service; enabled; preset: disabled) Drop-In: /usr/lib/systemd/system/service.d └─10-timeout-abort.conf Active: inactive (dead) In /usr/lib/systemd/system/nut-server.service there's mention of: # The `upsd` is a networked service (even if bound to a `localhost`) # so it requires that the OS has some notion of networking already. # Extending the unit does not require *this* file to be edited, you # can instead drop in an additional piece of configuration, e.g. to # require that NUT data server only starts after external networking # is configured (usable IP addresses appear in the system) you can # add a `/etc/systemd/system/nut-server.service.d/network.conf` with: # [Unit] # Requires=network-online.target # After=network-online.target However adding this file with those three lines (uncommented yes) still results in no nut-server running, with and without LISTEN lines in upsd.conf. Since there's no issues starting the service manually after reboot, I feel like this is some kind of systemd thing as opposed to a nut config issue. Various config file contents: nut.conf MODE=netserver ups.conf maxretry = 3 [cp1500] driver = usbhid-ups port = auto vendorid = 0764 pollinterval = 5 desc = "toshiba: TV, roku, switch" upsd.conf LISTEN 0.0.0.0 3493 upsmon.conf MONITOR cp1500@localhost 1 monuser monuserpass primary MINSUPPLIES 1 SHUTDOWNCMD "/sbin/shutdown -h +0" POLLFREQ 5 POLLFREQALERT 5 HOSTSYNC 15 DEADTIME 15 POWERDOWNFLAG "/etc/killpower" NOTIFYMSG ONLINE "UPS %s on line power" NOTIFYMSG ONBATT "UPS %s on battery" NOTIFYMSG LOWBATT "UPS %s battery is low" NOTIFYMSG FSD "UPS %s: forced shutdown in progress" NOTIFYMSG COMMOK "Communications with UPS %s established" NOTIFYMSG COMMBAD "Communications with UPS %s lost" NOTIFYMSG SHUTDOWN "Auto logout and shutdown proceeding" NOTIFYMSG REPLBATT "UPS %s battery needs to be replaced" NOTIFYMSG NOCOMM "UPS %s is unavailable" NOTIFYMSG NOPARENT "upsmon parent process died - shutdown impossible" NOTIFYFLAG ONLINE SYSLOG+WALL NOTIFYFLAG ONBATT SYSLOG+WALL NOTIFYFLAG LOWBATT SYSLOG+WALL NOTIFYFLAG FSD SYSLOG+WALL NOTIFYFLAG COMMOK SYSLOG+WALL NOTIFYFLAG COMMBAD SYSLOG+WALL NOTIFYFLAG SHUTDOWN SYSLOG+WALL NOTIFYFLAG REPLBATT SYSLOG+WALL NOTIFYFLAG NOCOMM SYSLOG+WALL NOTIFYFLAG NOPARENT SYSLOG+WALL OFFDURATION 30 RBWARNTIME 43200 NOCOMMWARNTIME 300 FINALDELAY 5 Ultimately I need this service to listen on lan interface as I query it from other lan machine. Can anyone provide any insight on my issue? Thanks
_______________________________________________ Nut-upsuser mailing list [email protected] https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsuser
