Hi,
On my FreeBSD box which is connected to the UPS I have the following
configuration (config not shown is left as default):
ups.conf
[apc]
driver = "usbhid-ups" # alternately:
port = "auto"
vendorid = "051D"
productid = "0003"
product = "Smart-UPS X 2200 FW:UPS 07.4 / ID=01003"
serial = "AS2039254737"
vendor = "American Power Conversion"
# bus = "000"
# device = "002"
# busport = "013"
upsd.conf
LISTEN 192.168.123.4 3493
upsd.users
[upsprimary]
password = *****
upsmon primary
[upssecondary]
password *****
upsmon secondary
upsmon.conf
MONITOR [email protected] 1 upsprimary ***** primary
And I can see all the processes running:
# ps -xa | grep -e ups -e nut
66945 - Is 0:00.00 /usr/local/bin/upslog -s myups@localhost -l
/var/log/nut/ups.log -i 300
66960 - Is 0:00.00 /usr/local/sbin/upsmon localhost
66961 - S 0:00.03 /usr/local/sbin/upsmon localhost
67166 - Ss 0:00.09 /usr/local/libexec/nut/usbhid-ups -a apc
67168 - Ss 0:00.06 /usr/local/sbin/upsd
And I can query the ups (Oddly with no need to use a username and password):
# upsc [email protected]
battery.charge: 100
battery.charge.low: 10
battery.charge.warning: 50
battery.runtime: 5655
battery.runtime.low: 120
battery.type: PbAc
battery.voltage: 132.0
battery.voltage.nominal: 120.0
device.mfr: American Power Conversion
device.model: Smart-UPS X 2200
device.serial: AS2039254737
device.type: ups
driver.debug: 0
driver.flag.allow_killpower: 0
driver.name: usbhid-ups
driver.parameter.pollfreq: 30
driver.parameter.pollinterval: 2
driver.parameter.port: auto
driver.parameter.product: Smart-UPS X 2200 FW:UPS 07.4 / ID=01003
driver.parameter.productid: 0003
driver.parameter.serial: AS2039254737
driver.parameter.synchronous: auto
driver.parameter.vendor: American Power Conversion
driver.parameter.vendorid: 051D
driver.state: quiet
driver.version: 2.8.2
driver.version.data: APC HID 0.100
driver.version.internal: 0.53
driver.version.usb: libusb-1.0.0 (API: 0x1000102)
ups.beeper.status: enabled
ups.delay.shutdown: 20
ups.firmware: UPS 07.4 / ID=01003
ups.mfr: American Power Conversion
ups.mfr.date: 2020/09/27
ups.model: Smart-UPS X 2200
ups.productid: 0003
ups.serial: AS2039254737
ups.status: OL
ups.timer.reboot: -1
ups.timer.shutdown: -1
ups.vendorid: 051d
On a linux box I have:
upsmon.conf
MONITOR [email protected] 1 upssecondary ***** slave
And can query the ups (Again with no need to supply the username and
password):
# upsc [email protected] ups.status
OL
When I start upsmon I see the following logging:
Feb 11 12:57:42 buildsever01 upsmon[17519]: Startup successful
Feb 11 12:57:42 buildsever01 upsmon[17520]: Login on UPS
[[email protected]] failed - got [ERR ACCESS-DENIED]
Feb 11 13:05:28 buildsever01 upsmon[17520]: Poll UPS [[email protected]]
failed - Server disconnected
Feb 11 13:05:28 buildsever01 upsmon[17520]: Communications with UPS
[email protected] lost
Feb 11 13:05:33 buildsever01 upsmon[17520]: Communications with UPS
[email protected] established
On a OpenBSD box I have:
upsmon.conf
MONITOR [email protected] 1 upssecondary ***** secondary
And when I start upsmon I see the following:
# upsmon -F
Network UPS Tools upsmon 2.8.2
kill: No such process
UPS: [email protected] (secondary) (power value 1)
Using power down flag file /etc/killpower
upsnotify: failed to notify about state 2: no notification tech defined,
will not spam more about it
(After initial testing I've started upsmon on this machine via rcctl
enable upsmon && rcctl start upsmon.)
Is that it?? Is it all working? If I go and pull the power cable out of
the UPS these three machine should shut down once the battery reaches a
critical level based on the following?
battery.charge.low: 10
battery.charge.warning: 50
These servers are in a air conditioned rack. The air conditioning is not
plugged into a UPS (Don't ask) so ideally as soon as the UPS reports its
state as on batteries nut should shut these servers down.
I've seen that the levels can be overridden...
override.battery.charge.low = 10
override.battery.charge.warning = 50
So maybe I could set warning to 95 and low to 90?
Also is it possible to use nut to shut the servers down if the temp in
the rack goes above some value? I don't see the UPS reporting the temp
though.
Thanks
_______________________________________________
Nut-upsuser mailing list
[email protected]
https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsuser
