27.05.2025 14:33, Greg Troxel:
Alexey Korobeinikov<[email protected]> writes:
The UPS Powercom (productid: 0004 vendorid: 0d9f) with:
driver.version: 2.8.3.1
driver.version.data: PowerCOM HID 0.71
driver.version.internal: 0.64
driver.version.usb: libusb-1.0.26 (API: 0x01000109)
has ingnorig parametr ups.delay.start.
It turn on imediatly after power restore on input line.
What did Powercom say when you asked them about this?
I don't now is this command/option are the same (load.on.delay) :
upscmd -l ups
Instant commands supported on UPS [ups]:
beeper.disable - Disable the UPS beeper
beeper.enable - Enable the UPS beeper
beeper.toggle - Toggle the UPS beeper
driver.killpower - Description unavailable
driver.reload - Description unavailable
driver.reload-or-error - Description unavailable
driver.reload-or-exit - Description unavailable
load.on - Turn on the load immediately
load.on.delay - Turn on the load with a delay (seconds)
shutdown.default - Description unavailable
shutdown.return - Turn off the load and return when power is back
shutdown.stayoff - Turn off the load and remain off
test.battery.start.quick - Start a quick battery test
and (ondelay):
[UPS]
driver = usbhid-ups
vendorid = 0d9f
productid = 0004
port = auto
pollinterval = 2
pollfreq = 20
offdelay = 30
ondelay = 60
allow_killpower
ignorelb
override.battery.charge.low = 70
If "Yes" then:
upscmd -u admin UPS load.on.delay 45
Password:
OK
Is there vendor-provided or other software, and if so what happened when
you tried to set power-on-delay with that software?
--
З Повагою
Коробейніков Олексій
Системний адміністратор
ТОВ "Флагман Сіфуд"
вул. Броварська 152, смт Велика Димерка
Київська область, 07442
р.+38 044 495-88-00
вн.6101
м.+38 067 994-40-48
_______________________________________________
Nut-upsuser mailing list
[email protected]
https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsuser
