OK, so I made this file:
------------------------------------------
#!/bin/sh<\n>
#chkconfig: 2345 60 99
#description: NUT ups daemon
if [ ! -f /usr/local/ups/bin/upsd ]
then
echo "NUT startup: cannot start"
exit
fi
case "$1" in
"start")
chmod 0600 /proc/bus/usb/005/002
chown nut:nut /proc/bus/usb/005/002
/usr/local/ups/bin/upsdrvctl
/usr/local/ups/sbin/upsd
/usr/local/ups/sbin/upsmon
;;
"stop")
echo -n "Shutting down UPS monitoring:"
/usr/local/ups/sbin/upsmon -c stop
/usr/local/ups/sbin/upsd -c stop
/usr/local/ups/bin/upsdrvctl stop
;;
"restart")
$0 stop
sleep 15
$0 start
"status")
/usr/local/ups/bin/upsc [EMAIL PROTECTED]
*)
echo "Usage: $0 {start|stop|restart|status}"
exit 1
esac
-----------------------------------------
and saved it as:
/etc/init.d/upsd
and made it executable:
chmod 755 /etc/init.d/upsd -- but left the owner and group as root
and then added it to the chkconfig system:
chkconfig --add upsd
and made sure it will be run at statup:
chkconfig --levels 2345 upsd on
I checked to make sure the commands in the file worked correctly when run from
the command line logged in as root and I checked to make sure that the levels
got set right.
BUT... it doesn't run correctly on start up and when I execute any of these
lines from the command line:
service upsd start
service upsd retart
service upsd stop
service upsd status
I get the same error:
env: /etc/init.d/upsd file not found
any ideas???
Thanks and an appology to Pete Selinger, who suffered through me replying to him
instead of to the list!!!
steve
_______________________________________________
Nut-upsuser mailing list
[email protected]
http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
