Hi Arnaud, Have attached the debug log to this message.
Thanks for your assistance. Will forward to libusb maintainer as suggested. Regards Nevil -----Original Message----- From: Arnaud Quette [mailto:[EMAIL PROTECTED] Sent: Friday, 3 March 2006 6:45 PM To: Nevil Thatcher; Thierry Thomas Cc: [email protected] Subject: Re: [Nut-upsuser] MGE Nova 1100 using newhidups on netBSD 3.0 Hi Nevil, 2006/3/2, Nevil Thatcher <[EMAIL PROTECTED]>: > Hi Arnaud, > > Well I have built & installed libusb 0.1.11. > > No difference in behaviour. > > Ran the test suite as suggested and noted still getting the input/output > error reported on many (but not all) of the usb_control_msg calls. > > In looking at this ,always appeared to be on calls with large buffers ? > > On looking through the doco's found that there was a setting in the request > structure passed to ioctl to allow short xfer's. This was not used so > requests were a larger buffer was provided than the data size returned was > generating the input/output errors (I think). > > Anyway changed the code in bsd.c (libusb) function usb_control_msg > > From req.ucr_flags = 0; > To req.ucr_flags = USBD_SHORT_XFER_OK; > > And now don't get the input/output errors!. a good catch. Can you forward it to the libusb maintainer? @Thierry: any news on freeBSD? The same problem should occur as it has here solved the getstring problem too (for ups.{model,mfr} > This hasn't solved the fact that I still get stale data until such time as I > unplug/replug the USB cable but at least after I do that upsc is reporting > UPS related variables which it wasn't before. I think this second one is due to the fact that notification do not work Can you send back a debug (level 3 == "newhidups -DDD") output, also exporting USB_DEBUG=3 > Ie. > > bash-3.1# upsc [EMAIL PROTECTED] > battery.charge: 100 > battery.charge.low: 30 > battery.runtime: 1000 > driver.name: newhidups > driver.parameter.pollinterval: 15 > driver.parameter.port: auto > driver.version: 2.0.3 > driver.version.data: MGE HID 0.8 > driver.version.internal: 0.28 > outlet.1.switch: 1 > output.voltage: 230.0 > ups.delay.shutdown: -1 > ups.delay.start: -10 > ups.load: 39 > ups.mfr: MGE UPS SYSTEMS > ups.model: NOVA 1100 AVR > ups.power.nominal: 1100 > ups.status: OL CHRG > ... so, we're on the way to have full *BSD support ;-) Arnaud -- Linux / Unix Expert - MGE UPS SYSTEMS - R&D Dpt Network UPS Tools (NUT) Project Leader - http://www.networkupstools.org/ Debian Developer - http://people.debian.org/~aquette/ OpenSource Developer - http://arnaud.quette.free.fr/
newhidups.log
Description: Binary data
_______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
