Hi Samuel, As a first note, MGE officially support NUT and its users, so you could also have contacted the standard MGE support channels...
2006/3/8, Samuel Díaz García <[EMAIL PROTECTED]>: > Hi people. > I'm trying to config a: > > MGE ELISE PREMIUM 1200 > NT 02 Serial Nr. 92HE04008 > > With its serial cable into /dev/ttyS0. > > I had configured ups.conf, with no luck. > > Here is my ups.conf: > > [upscura] > driver = mge-shut > port = /dev/ttyS0 > desc = "UPS" > > The permissions into /dev/ttyS?: > > crw------- 1 nut nut 4, 64 mar 8 18:43 /dev/ttyS0 > crw------- 1 nut nut 4, 65 mar 8 18:42 /dev/ttyS1 > > I tried with FC4 rpm (nut 2.0.2) with the same messages than nut 2.0.3 (manual > compilation and installation) trying to load the driver: > > [EMAIL PROTECTED] etc]# /usr/local/ups/bin/upsdrvctl start > Network UPS Tools - UPS driver controller 2.0.3 > Network UPS Tools - MGE UPS SYSTEMS/SHUT driver 0.65 (2.0.3) > No communication with UPS > Driver failed to start (exit status=1) > > I tested the cable with a polymeter and is ok and appear to be in this schema: > > http://www.networkupstools.org/cables/mgeups.html > > I don't know how to test the comunication between the pc and the ups and see > if > its ok or not. > > Could anybody help me please? Is very important to have ups working in this > pc. > there are some situation where the Ellipse communication can be stick. The best way to reset the communication is to power off the UPS, then unplug its power cable, wait (at least) 10 seconds and replug/restart all. Then the communication should be ok. To test it, launch manually: mge-shut -DDDDD -a upscura In case the problem isn't solved (hardware issue), contact me back. Arnaud -- Linux / Unix Expert - MGE UPS SYSTEMS - R&D Dpt Network UPS Tools (NUT) Project Leader - http://www.networkupstools.org/ Debian Developer - http://people.debian.org/~aquette/ OpenSource Developer - http://arnaud.quette.free.fr/ _______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
