Hi, I've made progress of sorts. I was getting so many conflicts over gcc and g++, I decided to go for a clean install.
I have compiled the driver without a hitch and connected the machine via USB and it has registered although it also adds that "USB Device 2 is not claimed by any active driver". I then run the following and get an error message: -------------------------- [EMAIL PROTECTED]:/usr/local/ups/bin# ./bcmxcp_usb -DD -a pw5110 -u root Network UPS Tools - BCMXCP UPS driver 0.10 (2.0.3) debug level is '2' Can't reset POWERWARE USB endpoint Unable to find POWERWARE UPS device on USB bus Things to try: - Connect UPS device to USB bus - Run this driver as another user (upsdrvctl -u or 'user=...' in ups.conf). See upsdrvctl(8) and ups.conf(5). Fatal error: unusable configuration ---------------------------------- Thanks very much for all the help so far, I hope someone can help me out with this. Kind regards, John _______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
