Hi all, I have a MGE Ellipse 600 UPS connected to com1 on a PC running FreeBSD 4.11 with nut-2.0.2_1 installed. I have everything working and operational. BUT. on rare occasions I reboot my machine and when it comes up I get the following error:
Network UPS Tools - UPS driver controller 2.0.2 Network UPS Tools - MGE UPS SYSTEMS/SHUT driver 0.64 (2.0.2) No communication with UPS Driver failed to start (exit status=1) If I keep retrying using '/usr/local/libexec/nut/upsdrvctl start ' I keep getting the same error. What I have done in the past is to shutdown the machine and unplug all the cables and turn the UPS off. I then wait a period of time and plug everything back in and power back on. This randomly works and I am able to get a connection back sometimes. Now, I dont know if this is a nut problem not initializing corectly or its a UPS problem where it locks up and doesnt want to talk. Has anyone else seen the problem and what was the solution. -- Daryl Sayers Direct: +612 95525510 Corinthian Engineering Office: +612 95525500 Suite 54, Jones Bay Wharf Fax: +612 95525549 26-32 Pirrama Rd email: [EMAIL PROTECTED] Pyrmont NSW 2009 Australia www: http://www.ci.com.au _______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
