Charles Lepple wrote: > On 8/2/06, Didrik Pinte <[EMAIL PROTECTED]> wrote: > > Le mercredi 02 ao=FBt 2006 =E0 08:08 -0400, Charles Lepple a =E9crit : > > > On 8/2/06, Didrik Pinte <[EMAIL PROTECTED]> wrote: > > > > Can you start the driver like this: "/sw/bin/newhidups -u root -DDD" > > > and paste some of the output? > > > > Here you are :-) See below. The mailing list address seems broken ... tha= > t's why i've > > sent the mail to your private address > > Looks strange... I am copying Peter Selinger, who is much more > familiar with this driver than I am. I am sure the mailing list > problem is temporary, so we should probably take this discussion to > the nut-upsdev list at some point later. > > Peter, is this at all like the CyberPower unit that you saw? The > usages look like they are all private.
I have only twice seen a 0764/0005 unit. The first was a Cyberpower 900AVR, in a post by Lincoln Turner on 13 Apr 2006 to Nut-upsdev. The second was a Cyberpower 1200AVR in a post by Doug Reynolds on 27 Jul 2006. This device announces itself as a "RS232 USB BRIDGE", so it is highly unlikely that it is a HID device. It looks like a serial-over-USB protocol. Therefore, the newhidups driver does not support it. Doug Reynolds reported that he got this to work with a modified version of the cpsups driver (presumably serial!). His modifications are contained in the 27 Jul 2006 post. -- Peter > > ---------------------------------------- > > MacMini:~ did$ sudo /sw/bin/newhidups -u root -DDD auto > > Network UPS Tools: New USB/HID UPS driver 0.28 (2.0.4) > > debug level is '3' > > Checking device (05AC/8005) (001/001-05ac-8005-09-00) > > - VendorID: 05ac > > - ProductID: 8005 > > - Manufacturer: unknown > > - Product: unknown > > - Serial Number: unknown > > - Bus: 001 > > Trying to match device > > Device does not match - skipping > > Checking device (0764/0005) (001/002-0764-0005-00-00) > > - VendorID: 0764 > > - ProductID: 0005 > > - Manufacturer: Cyber Power System > > - Product: CPS RS232 USB BRIDGE for UPS > > - Serial Number: unknown > > - Bus: 001 > > Trying to match device > > Device matches > > failed to claim USB device... > > HID descriptor retrieved (Reportlen =3D 90) > > Size read for the report descriptor: 90 > > Report descriptor retrieved (Reportlen =3D 90) > > Found HID device > > Report Descriptor size =3D 90 > > Report Descriptor: (200 bytes) =3D> 06 01 FF 09 1D A1 01 15 00 25 04 75 0= > 8 > > 95 01 09 > > Detected a UPS: Cyber Power System/CPS RS232 USB BRIDGE for UPS > > Using subdriver: APC/CyberPower HID 0.9 > > Looking up ff01001d > > Looking up ff010002 > > entering string_to_path() > > Looking up ff01001d > > Looking up ff010002 > > Report : (8 bytes) =3D> 00 00 9C F3 00 03 10 D2 > > Path: ff01001d.ff010002, Type: Feature, Value: 0.000000 > > Looking up ff01001d > > Looking up ff01000d > > entering string_to_path() > > Looking up ff01001d > > Looking up ff01000d > > Report : (8 bytes) =3D> 00 00 9C F3 00 03 10 D2 > > Path: ff01001d.ff01000d, Type: Feature, Value: 0.000000 > > Looking up ff01001d > > Looking up ff01000b > > entering string_to_path() > > Looking up ff01001d > > Looking up ff01000b > > Report : (8 bytes) =3D> 00 00 9C F3 00 03 10 D2 > > Path: ff01001d.ff01000b, Type: Feature, Value: 0.000000 > > Looking up ff01001d > > Looking up ff01000a > > entering string_to_path() > > Looking up ff01001d > > Looking up ff01000a > > Report : (8 bytes) =3D> 00 00 9C F3 00 03 10 D2 > > Path: ff01001d.ff01000a, Type: Feature, Value: 0.000000 > > Looking up ff01001d > > Looking up ff01000c > > entering string_to_path() > > Looking up ff01001d > > Looking up ff01000c > > Report : (8 bytes) =3D> 00 00 9C F3 00 03 10 D2 > > Path: ff01001d.ff01000c, Type: Feature, Value: 0.000000 > > Looking up ff01001d > > Looking up ff010008 > > entering string_to_path() > > Looking up ff01001d > > Looking up ff010008 > > Report : (8 bytes) =3D> 00 00 9C F3 00 03 10 D2 > > Path: ff01001d.ff010008, Type: Feature, Value: 0.000000 > > Looking up ff01001d > > Looking up ff010009 > > entering string_to_path() > > Looking up ff01001d > > Looking up ff010009 > > Report : (8 bytes) =3D> 00 00 9C F3 00 03 10 D2 > > Path: ff01001d.ff010009, Type: Feature, Value: 0.000000 > > Looking up ff01001d > > Looking up ff010001 > > entering string_to_path() > > Looking up ff01001d > > Looking up ff010001 > > Report : (8 bytes) =3D> 00 00 9C F3 00 03 10 D2 > > Path: ff01001d.ff010001, Type: Feature, Value: 0.000000 > > Looking up ff01001d > > Looking up ff010007 > > entering string_to_path() > > Looking up ff01001d > > Looking up ff010007 > > Report : (8 bytes) =3D> 00 00 9C F3 00 03 10 D2 > > Path: ff01001d.ff010007, Type: Feature, Value: 0.000000 > > Looking up ff01001d > > Looking up ff010016 > > entering string_to_path() > > Looking up ff01001d > > Looking up ff010016 > > Report : (8 bytes) =3D> 00 00 9C F3 00 03 10 D2 > > Path: ff01001d.ff010016, Type: Input, Value: 0.000000 > > Looking up ff01001d > > Looking up ff010018 > > entering string_to_path() > > Looking up ff01001d > > Looking up ff010018 > > Report : (8 bytes) =3D> 00 00 9C F3 00 03 10 D2 > > Path: ff01001d.ff010018, Type: Input, Value: 0.000000 > > Looking up ff01001d > > Looking up 00000000 > > Looking up ff01001d > > Looking up 00000000 > > Looking up ff01001d > > Looking up 00000000 > > Looking up ff01001d > > Looking up 00000000 > > Looking up ff01001d > > Looking up 00000000 > > Looking up ff01001d > > Looking up 00000000 > > Looking up ff01001d > > Looking up ff010015 > > entering string_to_path() > > Looking up ff01001d > > Looking up ff010015 > > Report : (8 bytes) =3D> 00 00 9C F3 00 03 10 D2 > > Path: ff01001d.ff010015, Type: Output, Value: 0.000000 > > Looking up ff01001d > > Looking up ff010017 > > entering string_to_path() > > Looking up ff01001d > > Looking up ff010017 > > Report : (8 bytes) =3D> 00 00 9C F3 00 03 10 D2 > > Path: ff01001d.ff010017, Type: Output, Value: 0.000000 > > Looking up ff01001d > > Looking up 00000000 > > Looking up ff01001d > > Looking up 00000000 > > Looking up ff01001d > > Looking up 00000000 > > Looking up ff01001d > > Looking up 00000000 > > Looking up ff01001d > > Looking up 00000000 > > Looking up ff01001d > > Looking up 00000000 > > entering identify_ups(0x0764, 0x0005) > > > > entering string_to_path() > > Looking up UPS > > Looking up PowerSummary > > Looking up RemainingCapacity > > Report : (8 bytes) =3D> 00 00 9C F3 00 03 10 D2 > > entering string_to_path() > > Looking up UPS > > Looking up PowerSummary > > Looking up RemainingCapacityLimit > > Report : (8 bytes) =3D> 00 00 9C F3 00 03 10 D2 > > entering string_to_path() > > Looking up UPS > > Looking up PowerSummary > > Looking up WarningCapacityLimit > > Report : (8 bytes) =3D> 00 00 9C F3 00 03 10 D2 > > entering string_to_path() > > Looking up UPS > > Looking up PowerSummary > > Looking up RunTimeToEmpty > > Report : (8 bytes) =3D> 00 00 9C F3 00 03 10 D2 > > entering string_to_path() > > Looking up UPS > > Looking up PowerSummary > > Looking up RemainingTimeLimit > > Report : (8 bytes) =3D> 00 00 9C F3 00 03 10 D2 > > entering string_to_path() > > Looking up UPS > > Looking up PowerSummary > > Looking up Voltage > > Report : (8 bytes) =3D> 00 00 9C F3 00 03 10 D2 > > entering string_to_path() > > Looking up UPS > > Looking up Battery > > Looking up ConfigVoltage > > Report : (8 bytes) =3D> 00 00 9C F3 00 03 10 D2 > > entering string_to_path() > > Looking up UPS > > Looking up Battery > > Looking up Temperature > > Report : (8 bytes) =3D> 00 00 9C F3 00 03 10 D2 > > hu_find_infoval: searching for value =3D 0 > > > > hu_find_infoval: found -273 (value: 0) > > > > entering string_to_path() > > Looking up UPS > > Looking up PowerSummary > > Looking up iDeviceChemistry > > Report : (8 bytes) =3D> 00 00 9C F3 00 03 10 D2 > > hu_find_infoval: searching for value =3D 0 > > > > -> String: ? (len =3D 1/4) > > hu_find_infoval: found ? (value: 0) > > > > entering string_to_path() > > Looking up UPS > > Looking up Battery > > Looking up ManufacturerDate > > Report : (8 bytes) =3D> 00 00 9C F3 00 03 10 D2 > > hu_find_infoval: searching for value =3D 0 > > > > hu_find_infoval: found not set (value: 0) > > > > entering string_to_path() > > Looking up UPS > > Looking up Battery > > Looking up APCBattReplaceDate > > Report : (8 bytes) =3D> 00 00 9C F3 00 03 10 D2 > > hu_find_infoval: searching for value =3D 0 > > > > hu_find_infoval: found not set (value: 0) > > > > entering string_to_path() > > Looking up UPS > > Looking up Output > > Looking up PercentLoad > > Report : (8 bytes) =3D> 00 00 9C F3 00 03 10 D2 > > entering string_to_path() > > Looking up UPS > > Looking up PowerSummary > > Looking up DelayBeforeShutdown > > Report : (8 bytes) =3D> 00 00 9C F3 00 03 10 D2 > > entering string_to_path() > > Looking up UPS > > Looking up Battery > > Looking up Test > > Report : (8 bytes) =3D> 00 00 9C F3 00 03 10 D2 > > hu_find_infoval: searching for value =3D 0 > > > > hu_find_infoval: no matching INFO_* value for this HID value (0) > > > > dstate_setflags: base variable (ups.test.result) does not exist > > entering string_to_path() > > Looking up UPS > > Looking up Output > > Looking up Test > > Report : (8 bytes) =3D> 00 00 9C F3 00 03 10 D2 > > hu_find_infoval: searching for value =3D 0 > > > > hu_find_infoval: no matching INFO_* value for this HID value (0) > > > > dstate_setflags: base variable (ups.test.result) does not exist > > entering string_to_path() > > Looking up UPS > > Looking up PowerSummary > > Looking up AudibleAlarmControl > > Report : (8 bytes) =3D> 00 00 9C F3 00 03 10 D2 > > hu_find_infoval: searching for value =3D 0 > > > > hu_find_infoval: no matching INFO_* value for this HID value (0) > > > > dstate_setflags: base variable (ups.beeper.status) does not exist > > dstate_setaux: base variable (ups.beeper.status) does not exist > > entering string_to_path() > > Looking up UPS > > Looking up ManufacturerDate > > Report : (8 bytes) =3D> 00 00 9C F3 00 03 10 D2 > > hu_find_infoval: searching for value =3D 0 > > > > hu_find_infoval: found not set (value: 0) > > > > entering string_to_path() > > Looking up UPS > > Looking up Output > > Looking up ConfigActivePower > > entering string_to_path() > > Looking up UPS > > Looking up PowerSummary > > Looking up PresentStatus > > Looking up ACPresent > > Report : (8 bytes) =3D> 00 00 9C F3 00 03 10 D2 > > hu_find_infoval: searching for value =3D 0 > > > > hu_find_infoval: found !online (value: 0) > > > > process_status_info: !online > > entering string_to_path() > > Looking up UPS > > Looking up PowerSummary > > Looking up PresentStatus > > Looking up Discharging > > Report : (8 bytes) =3D> 00 00 9C F3 00 03 10 D2 > > hu_find_infoval: searching for value =3D 0 > > > > hu_find_infoval: found !dischrg (value: 0) > > > > process_status_info: !dischrg > > entering string_to_path() > > Looking up UPS > > Looking up PowerSummary > > Looking up PresentStatus > > Looking up Charging > > Report : (8 bytes) =3D> 00 00 9C F3 00 03 10 D2 > > hu_find_infoval: searching for value =3D 0 > > > > hu_find_infoval: found !chrg (value: 0) > > > > process_status_info: !chrg > > entering string_to_path() > > Looking up UPS > > Looking up PowerSummary > > Looking up PresentStatus > > Looking up ShutdownImminent > > Report : (8 bytes) =3D> 00 00 9C F3 00 03 10 D2 > > hu_find_infoval: searching for value =3D 0 > > > > hu_find_infoval: found !shutdownimm (value: 0) > > > > process_status_info: !shutdownimm > > entering string_to_path() > > Looking up UPS > > Looking up PowerSummary > > Looking up PresentStatus > > Looking up BelowRemainingCapacityLimit > > Report : (8 bytes) =3D> 00 00 9C F3 00 03 10 D2 > > hu_find_infoval: searching for value =3D 0 > > > > hu_find_infoval: found !lowbatt (value: 0) > > > > process_status_info: !lowbatt > > entering string_to_path() > > Looking up UPS > > Looking up PowerSummary > > Looking up PresentStatus > > Looking up OverLoad > > Report : (8 bytes) =3D> 00 00 9C F3 00 03 10 D2 > > hu_find_infoval: searching for value =3D 0 > > > > hu_find_infoval: found !overload (value: 0) > > > > process_status_info: !overload > > entering string_to_path() > > Looking up UPS > > Looking up PowerSummary > > Looking up PresentStatus > > Looking up NeedReplacement > > Report : (8 bytes) =3D> 00 00 9C F3 00 03 10 D2 > > hu_find_infoval: searching for value =3D 0 > > > > hu_find_infoval: found !replacebatt (value: 0) > > > > process_status_info: !replacebatt > > entering string_to_path() > > Looking up UPS > > Looking up PowerSummary > > Looking up PresentStatus > > Looking up RemainingTimeLimitExpired > > Report : (8 bytes) =3D> 00 00 9C F3 00 03 10 D2 > > hu_find_infoval: searching for value =3D 0 > > > > hu_find_infoval: found !timelimitexp (value: 0) > > > > process_status_info: !timelimitexp > > entering string_to_path() > > Looking up UPS > > Looking up PowerSummary > > Looking up PresentStatus > > Looking up BatteryPresent > > Report : (8 bytes) =3D> 00 00 9C F3 00 03 10 D2 > > hu_find_infoval: searching for value =3D 0 > > > > hu_find_infoval: found !batterypres (value: 0) > > > > process_status_info: !batterypres > > entering string_to_path() > > Looking up UPS > > Looking up PowerSummary > > Looking up Charging > > Report : (8 bytes) =3D> 00 00 9C F3 00 03 10 D2 > > hu_find_infoval: searching for value =3D 0 > > > > hu_find_infoval: found !chrg (value: 0) > > > > process_status_info: !chrg > > entering string_to_path() > > Looking up UPS > > Looking up PowerSummary > > Looking up Discharging > > Report : (8 bytes) =3D> 00 00 9C F3 00 03 10 D2 > > hu_find_infoval: searching for value =3D 0 > > > > hu_find_infoval: found !dischrg (value: 0) > > > > process_status_info: !dischrg > > entering string_to_path() > > Looking up UPS > > Looking up PowerSummary > > Looking up ACPresent > > Report : (8 bytes) =3D> 00 00 9C F3 00 03 10 D2 > > hu_find_infoval: searching for value =3D 0 > > > > hu_find_infoval: found !online (value: 0) > > > > process_status_info: !online > > entering string_to_path() > > Looking up UPS > > Looking up PowerSummary > > Looking up BelowRemainingCapacityLimit > > Report : (8 bytes) =3D> 00 00 9C F3 00 03 10 D2 > > hu_find_infoval: searching for value =3D 0 > > > > hu_find_infoval: found !lowbatt (value: 0) > > > > process_status_info: !lowbatt > > entering string_to_path() > > Looking up UPS > > Looking up PowerSummary > > Looking up ShutdownImminent > > Report : (8 bytes) =3D> 00 00 9C F3 00 03 10 D2 > > hu_find_infoval: searching for value =3D 0 > > > > hu_find_infoval: found !shutdownimm (value: 0) > > > > process_status_info: !shutdownimm > > entering string_to_path() > > Looking up UPS > > Looking up PowerSummary > > Looking up PresentStatus > > Looking up FullyCharged > > Report : (8 bytes) =3D> 00 00 9C F3 00 03 10 D2 > > hu_find_infoval: searching for value =3D 0 > > > > hu_find_infoval: found !fullycharged (value: 0) > > > > process_status_info: !fullycharged > > entering string_to_path() > > Looking up UPS > > Looking up Output > > Looking up OverLoad > > Report : (8 bytes) =3D> 00 00 9C F3 00 03 10 D2 > > hu_find_infoval: searching for value =3D 0 > > > > hu_find_infoval: found !overload (value: 0) > > > > process_status_info: !overload > > entering string_to_path() > > Looking up UPS > > Looking up Output > > Looking up Boost > > Report : (8 bytes) =3D> 00 00 9C F3 00 03 10 D2 > > hu_find_infoval: searching for value =3D 0 > > > > hu_find_infoval: found !boost (value: 0) > > > > process_status_info: !boost > > entering string_to_path() > > Looking up UPS > > Looking up Input > > Looking up Voltage > > Report : (8 bytes) =3D> 00 00 9C F3 00 03 10 D2 > > entering string_to_path() > > Looking up UPS > > Looking up Input > > Looking up ConfigVoltage > > Report : (8 bytes) =3D> 00 00 9C F3 00 03 10 D2 > > entering string_to_path() > > Looking up UPS > > Looking up Input > > Looking up LowVoltageTransfer > > Report : (8 bytes) =3D> 00 00 9C F3 00 03 10 D2 > > entering string_to_path() > > Looking up UPS > > Looking up Input > > Looking up HighVoltageTransfer > > Report : (8 bytes) =3D> 00 00 9C F3 00 03 10 D2 > > entering string_to_path() > > Looking up UPS > > Looking up Output > > Looking up Voltage > > Report : (8 bytes) =3D> 00 00 9C F3 00 03 10 D2 > > entering string_to_path() > > Looking up UPS > > Looking up Output > > Looking up ConfigVoltage > > Report : (8 bytes) =3D> 00 00 9C F3 00 03 10 D2 > > entering string_to_path() > > Looking up UPS > > Looking up BatterySystem > > Looking up Battery > > Looking up Test > > Report : (8 bytes) =3D> 00 00 9C F3 00 03 10 D2 > > entering string_to_path() > > Looking up UPS > > Looking up BatterySystem > > Looking up Battery > > Looking up Test > > Report : (8 bytes) =3D> 00 00 9C F3 00 03 10 D2 > > entering string_to_path() > > Looking up UPS > > Looking up BatterySystem > > Looking up Battery > > Looking up Test > > Report : (8 bytes) =3D> 00 00 9C F3 00 03 10 D2 > > entering string_to_path() > > Looking up UPS > > Looking up APCPanelTest > > Report : (8 bytes) =3D> 00 00 9C F3 00 03 10 D2 > > entering string_to_path() > > Looking up UPS > > Looking up APCPanelTest > > Report : (8 bytes) =3D> 00 00 9C F3 00 03 10 D2 > > entering string_to_path() > > Looking up UPS > > Looking up PowerSummary > > Looking up APCPanelTest > > Report : (8 bytes) =3D> 00 00 9C F3 00 03 10 D2 > > entering string_to_path() > > Looking up UPS > > Looking up PowerSummary > > Looking up APCPanelTest > > Report : (8 bytes) =3D> 00 00 9C F3 00 03 10 D2 > > entering string_to_path() > > Looking up UPS > > Looking up PowerSummary > > Looking up DelayBeforeShutdown > > Report : (8 bytes) =3D> 00 00 9C F3 00 03 10 D2 > > entering string_to_path() > > Looking up UPS > > Looking up APCGeneralCollection > > Looking up APCDelayBeforeShutdown > > Report : (8 bytes) =3D> 00 00 9C F3 00 03 10 D2 > > entering string_to_path() > > Looking up UPS > > Looking up Output > > Looking up DelayBeforeShutdown > > Report : (8 bytes) =3D> 00 00 9C F3 00 03 10 D2 > > entering string_to_path() > > Looking up UPS > > Looking up PowerSummary > > Looking up DelayBeforeStartup > > Report : (8 bytes) =3D> 00 00 9C F3 00 03 10 D2 > > entering string_to_path() > > Looking up UPS > > Looking up Output > > Looking up DelayBeforeStartup > > Report : (8 bytes) =3D> 00 00 9C F3 00 03 10 D2 > > entering string_to_path() > > Looking up UPS > > Looking up APCGeneralCollection > > Looking up APCForceShutdown > > Report : (8 bytes) =3D> 00 00 9C F3 00 03 10 D2 > > entering string_to_path() > > Looking up UPS > > Looking up APCGeneralCollection > > Looking up APCDelayBeforeShutdown > > Report : (8 bytes) =3D> 00 00 9C F3 00 03 10 D2 > > entering string_to_path() > > Looking up UPS > > Looking up PowerSummary > > Looking up DelayBeforeShutdown > > Report : (8 bytes) =3D> 00 00 9C F3 00 03 10 D2 > > entering string_to_path() > > Looking up UPS > > Looking up Output > > Looking up DelayBeforeShutdown > > Report : (8 bytes) =3D> 00 00 9C F3 00 03 10 D2 > > entering string_to_path() > > Looking up UPS > > Looking up PowerSummary > > Looking up AudibleAlarmControl > > Report : (8 bytes) =3D> 00 00 9C F3 00 03 10 D2 > > entering string_to_path() > > Looking up UPS > > Looking up PowerSummary > > Looking up AudibleAlarmControl > > Report : (8 bytes) =3D> 00 00 9C F3 00 03 10 D2 > > upsdrv_updateinfo... > > entering string_to_path() > > Looking up UPS > > Looking up PowerSummary > > Looking up RemainingCapacity > > Report : (8 bytes) =3D> 00 00 9C F3 00 03 10 D2 > > entering string_to_path() > > Looking up UPS > > Looking up PowerSummary > > Looking up RemainingCapacityLimit > > Report : (8 bytes) =3D> 00 00 9C F3 00 03 10 D2 > > entering string_to_path() > > Looking up UPS > > Looking up PowerSummary > > Looking up WarningCapacityLimit > > Report : (8 bytes) =3D> 00 00 9C F3 00 03 10 D2 > > entering string_to_path() > > Looking up UPS > > Looking up PowerSummary > > Looking up RunTimeToEmpty > > Report : (8 bytes) =3D> 00 00 9C F3 00 03 10 D2 > > entering string_to_path() > > Looking up UPS > > Looking up PowerSummary > > Looking up RemainingTimeLimit > > Report : (8 bytes) =3D> 00 00 9C F3 00 03 10 D2 > > entering string_to_path() > > Looking up UPS > > Looking up PowerSummary > > Looking up Voltage > > Report : (8 bytes) =3D> 00 00 9C F3 00 03 10 D2 > > entering string_to_path() > > Looking up UPS > > Looking up Battery > > Looking up ConfigVoltage > > Report : (8 bytes) =3D> 00 00 9C F3 00 03 10 D2 > > entering string_to_path() > > Looking up UPS > > Looking up Battery > > Looking up Temperature > > Report : (8 bytes) =3D> 00 00 9C F3 00 03 10 D2 > > hu_find_infoval: searching for value =3D 0 > > > > hu_find_infoval: found -273 (value: 0) > > > > entering string_to_path() > > Looking up UPS > > Looking up PowerSummary > > Looking up iDeviceChemistry > > Report : (8 bytes) =3D> 00 00 9C F3 00 03 10 D2 > > hu_find_infoval: searching for value =3D 0 > > > > -> String: ? (len =3D 1/4) > > hu_find_infoval: found ? (value: 0) > > > > entering string_to_path() > > Looking up UPS > > Looking up Battery > > Looking up ManufacturerDate > > Report : (8 bytes) =3D> 00 00 9C F3 00 03 10 D2 > > hu_find_infoval: searching for value =3D 0 > > > > hu_find_infoval: found not set (value: 0) > > > > entering string_to_path() > > Looking up UPS > > Looking up Battery > > Looking up APCBattReplaceDate > > Report : (8 bytes) =3D> 00 00 9C F3 00 03 10 D2 > > hu_find_infoval: searching for value =3D 0 > > > > hu_find_infoval: found not set (value: 0) > > > > entering string_to_path() > > Looking up UPS > > Looking up Output > > Looking up PercentLoad > > Report : (8 bytes) =3D> 00 00 9C F3 00 03 10 D2 > > entering string_to_path() > > Looking up UPS > > Looking up PowerSummary > > Looking up DelayBeforeShutdown > > Report : (8 bytes) =3D> 00 00 9C F3 00 03 10 D2 > > entering string_to_path() > > Looking up UPS > > Looking up Battery > > Looking up Test > > Report : (8 bytes) =3D> 00 00 9C F3 00 03 10 D2 > > hu_find_infoval: searching for value =3D 0 > > > > hu_find_infoval: no matching INFO_* value for this HID value (0) > > > > entering string_to_path() > > Looking up UPS > > Looking up Output > > Looking up Test > > Report : (8 bytes) =3D> 00 00 9C F3 00 03 10 D2 > > hu_find_infoval: searching for value =3D 0 > > > > hu_find_infoval: no matching INFO_* value for this HID value (0) > > > > entering string_to_path() > > Looking up UPS > > Looking up PowerSummary > > Looking up AudibleAlarmControl > > Report : (8 bytes) =3D> 00 00 9C F3 00 03 10 D2 > > hu_find_infoval: searching for value =3D 0 > > > > hu_find_infoval: no matching INFO_* value for this HID value (0) > > > > entering string_to_path() > > Looking up UPS > > Looking up ManufacturerDate > > Report : (8 bytes) =3D> 00 00 9C F3 00 03 10 D2 > > hu_find_infoval: searching for value =3D 0 > > > > hu_find_infoval: found not set (value: 0) > > > > entering string_to_path() > > Looking up UPS > > Looking up PowerSummary > > Looking up PresentStatus > > Looking up ACPresent > > Report : (8 bytes) =3D> 00 00 9C F3 00 03 10 D2 > > hu_find_infoval: searching for value =3D 0 > > > > hu_find_infoval: found !online (value: 0) > > > > process_status_info: !online > > entering string_to_path() > > Looking up UPS > > Looking up PowerSummary > > Looking up PresentStatus > > Looking up Discharging > > Report : (8 bytes) =3D> 00 00 9C F3 00 03 10 D2 > > hu_find_infoval: searching for value =3D 0 > > > > hu_find_infoval: found !dischrg (value: 0) > > > > process_status_info: !dischrg > > entering string_to_path() > > Looking up UPS > > Looking up PowerSummary > > Looking up PresentStatus > > Looking up Charging > > Report : (8 bytes) =3D> 00 00 9C F3 00 03 10 D2 > > hu_find_infoval: searching for value =3D 0 > > > > hu_find_infoval: found !chrg (value: 0) > > > > process_status_info: !chrg > > entering string_to_path() > > Looking up UPS > > Looking up PowerSummary > > Looking up PresentStatus > > Looking up ShutdownImminent > > Report : (8 bytes) =3D> 00 00 9C F3 00 03 10 D2 > > hu_find_infoval: searching for value =3D 0 > > > > hu_find_infoval: found !shutdownimm (value: 0) > > > > process_status_info: !shutdownimm > > entering string_to_path() > > Looking up UPS > > Looking up PowerSummary > > Looking up PresentStatus > > Looking up BelowRemainingCapacityLimit > > Report : (8 bytes) =3D> 00 00 9C F3 00 03 10 D2 > > hu_find_infoval: searching for value =3D 0 > > > > hu_find_infoval: found !lowbatt (value: 0) > > > > process_status_info: !lowbatt > > entering string_to_path() > > Looking up UPS > > Looking up PowerSummary > > Looking up PresentStatus > > Looking up OverLoad > > Report : (8 bytes) =3D> 00 00 9C F3 00 03 10 D2 > > hu_find_infoval: searching for value =3D 0 > > > > hu_find_infoval: found !overload (value: 0) > > > > process_status_info: !overload > > entering string_to_path() > > Looking up UPS > > Looking up PowerSummary > > Looking up PresentStatus > > Looking up NeedReplacement > > Report : (8 bytes) =3D> 00 00 9C F3 00 03 10 D2 > > hu_find_infoval: searching for value =3D 0 > > > > hu_find_infoval: found !replacebatt (value: 0) > > > > process_status_info: !replacebatt > > entering string_to_path() > > Looking up UPS > > Looking up PowerSummary > > Looking up PresentStatus > > Looking up RemainingTimeLimitExpired > > Report : (8 bytes) =3D> 00 00 9C F3 00 03 10 D2 > > hu_find_infoval: searching for value =3D 0 > > > > hu_find_infoval: found !timelimitexp (value: 0) > > > > process_status_info: !timelimitexp > > entering string_to_path() > > Looking up UPS > > Looking up PowerSummary > > Looking up PresentStatus > > Looking up BatteryPresent > > Report : (8 bytes) =3D> 00 00 9C F3 00 03 10 D2 > > hu_find_infoval: searching for value =3D 0 > > > > hu_find_infoval: found !batterypres (value: 0) > > > > process_status_info: !batterypres > > entering string_to_path() > > Looking up UPS > > Looking up PowerSummary > > Looking up Charging > > Report : (8 bytes) =3D> 00 00 9C F3 00 03 10 D2 > > hu_find_infoval: searching for value =3D 0 > > > > hu_find_infoval: found !chrg (value: 0) > > > > process_status_info: !chrg > > entering string_to_path() > > Looking up UPS > > Looking up PowerSummary > > Looking up Discharging > > Report : (8 bytes) =3D> 00 00 9C F3 00 03 10 D2 > > hu_find_infoval: searching for value =3D 0 > > > > hu_find_infoval: found !dischrg (value: 0) > > > > process_status_info: !dischrg > > entering string_to_path() > > Looking up UPS > > Looking up PowerSummary > > Looking up ACPresent > > Report : (8 bytes) =3D> 00 00 9C F3 00 03 10 D2 > > hu_find_infoval: searching for value =3D 0 > > > > hu_find_infoval: found !online (value: 0) > > > > process_status_info: !online > > entering string_to_path() > > Looking up UPS > > Looking up PowerSummary > > Looking up BelowRemainingCapacityLimit > > Report : (8 bytes) =3D> 00 00 9C F3 00 03 10 D2 > > hu_find_infoval: searching for value =3D 0 > > > > hu_find_infoval: found !lowbatt (value: 0) > > > > process_status_info: !lowbatt > > entering string_to_path() > > Looking up UPS > > Looking up PowerSummary > > Looking up ShutdownImminent > > Report : (8 bytes) =3D> 00 00 9C F3 00 03 10 D2 > > hu_find_infoval: searching for value =3D 0 > > > > hu_find_infoval: found !shutdownimm (value: 0) > > > > process_status_info: !shutdownimm > > entering string_to_path() > > Looking up UPS > > Looking up PowerSummary > > Looking up PresentStatus > > Looking up FullyCharged > > Report : (8 bytes) =3D> 00 00 9C F3 00 03 10 D2 > > hu_find_infoval: searching for value =3D 0 > > > > hu_find_infoval: found !fullycharged (value: 0) > > > > process_status_info: !fullycharged > > entering string_to_path() > > Looking up UPS > > Looking up Output > > Looking up OverLoad > > Report : (8 bytes) =3D> 00 00 9C F3 00 03 10 D2 > > hu_find_infoval: searching for value =3D 0 > > > > hu_find_infoval: found !overload (value: 0) > > > > process_status_info: !overload > > entering string_to_path() > > Looking up UPS > > Looking up Output > > Looking up Boost > > Report : (8 bytes) =3D> 00 00 9C F3 00 03 10 D2 > > hu_find_infoval: searching for value =3D 0 > > > > hu_find_infoval: found !boost (value: 0) > > > > process_status_info: !boost > > entering string_to_path() > > Looking up UPS > > Looking up Input > > Looking up Voltage > > Report : (8 bytes) =3D> 00 00 9C F3 00 03 10 D2 > > entering string_to_path() > > Looking up UPS > > Looking up Input > > Looking up ConfigVoltage > > Report : (8 bytes) =3D> 00 00 9C F3 00 03 10 D2 > > entering string_to_path() > > Looking up UPS > > Looking up Input > > Looking up LowVoltageTransfer > > Report : (8 bytes) =3D> 00 00 9C F3 00 03 10 D2 > > entering string_to_path() > > Looking up UPS > > Looking up Input > > Looking up HighVoltageTransfer > > Report : (8 bytes) =3D> 00 00 9C F3 00 03 10 D2 > > entering string_to_path() > > Looking up UPS > > Looking up Output > > Looking up Voltage > > Report : (8 bytes) =3D> 00 00 9C F3 00 03 10 D2 > > entering string_to_path() > > Looking up UPS > > Looking up Output > > Looking up ConfigVoltage > > Report : (8 bytes) =3D> 00 00 9C F3 00 03 10 D2 > > dstate_init: sock /sw/var/run/ups/newhidups-auto open on fd 5 > > upsdrv_updateinfo... > > Waiting for notifications... > > upsdrv_updateinfo... > > Waiting for notifications... > > upsdrv_updateinfo... > > Waiting for notifications... > > Signal 2: exiting > > Closing device > > > > > > > > > --=20 > - Charles Lepple > _______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
