tor 2006-08-03 klockan 09:51 +0200 skrev Daniel Haas: > Hi NUT-Users, > Hi Daniel, > we work with a GE LP 33 UPS and an Advanced SNMP WEB Interface Card. This > card supports the RFC1628 Definition. > So I think this combination work together with NUT and the snmp-driver, > correct? > > I installed the networkupstools on my Debian Sarge with apt-get (nut & > nut-snmp). > > After configuration I start the upsd and upsmon. I get following output in > /var/log/syslog: > ... > Aug 3 08:40:44 localhost upsd[1321]: Connected to UPS [snmp]: > snmp-ups-136.8.4.14 > Aug 3 08:40:44 localhost snmp-ups[1320]: Startup successful > Aug 3 08:40:44 localhost upsd[1321]: Data for UPS [snmp] is stale - check > driver > Aug 3 08:40:44 localhost upsd[1322]: Startup successful > Aug 3 08:40:44 localhost upsmon[1324]: Startup successful > Aug 3 08:40:44 localhost upsmon[1325]: UPS [EMAIL PROTECTED]: connect > failed: Connection failure: Connection refused > Aug 3 08:40:44 localhost upsmon[1325]: Communications with UPS [EMAIL > PROTECTED] lost
Looks like you have to check your upsmon.conf. You should be monitoring [EMAIL PROTECTED] not smnp. Also check the ACl in upsd.conf if you run the monitor on another computer then the upsd. Best would be to give us all configs. Regards Kjell _______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
