Hi Alexander, sön 2006-08-06 klockan 14:36 +0400 skrev Alexander Zubkov: > I've updated to 2.0.4 and changed driver to megatec. It is working too. > Old info, showed by fentonups: > battery.charge: 100.0 > battery.voltage: 28.0 > driver.name: fentonups > driver.parameter.port: /dev/ttyS0 > driver.version: 2.0.3 > driver.version.internal: 1.22 > input.frequency: 49.9 > input.voltage: 221.0 > output.voltage: 223.6 > ups.load: 032 > ups.mfr: FUDEN > ups.model: Unknown S163-1000 > ups.status: OL TRIM > > Now it is more verbose :) > battery.charge: 100.0 > battery.voltage: 28.00 > battery.voltage.nominal: 24.0 > driver.name: megatec > driver.parameter.port: /dev/ttyS0 > driver.version: 2.0.4 > driver.version.internal: 1.4 > input.frequency: 49.9 > input.voltage: 219.3 > input.voltage.fault: 140.0 > input.voltage.maximum: 220.1 > input.voltage.minimum: 218.6 > output.voltage: 221.8 > output.voltage.nominal: 230.0 > ups.delay.shutdown: 2 > ups.delay.start: 3 > ups.load: 30.0 > ups.mfr: FUDEN > ups.model: S163-1000 9.02A > ups.serial: unknown > ups.status: OL BOOST > ups.temperature: 38.8 > > It is "PowerMan RealSmart 1000" model. I can also try to check PowerMan > BackPro model (I have access to machine with it) if it really works with > genericups. >
Thanks for the info. I change the driver to megatec for the RealSmart 1000 and 800 in the driver.list. I wait for the result on the BackPro. > > > > let's wait for feedback from Alexander on how his dev behave with megatec. > > > Arnaud > Regards Kjell _______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
