Hi Martin, please keep the discusion on the mailing list, it can be helpfull/of interrest for other persons ^_^ So I took the fredom to past here you previous mail :
-- Begining the mail of Martin Thank you very much indeed, this worked. But in syslog there are no messages like: "May 29 01:11:27 mybox upsmon[102]: Startup successful May 29 01:11:28 mybox upsd[100]: Client [EMAIL PROTECTED] logged into UPS [myupsname] " which the install file says thre should be. How can I be sure whether the configuration is correct? What shall I do so that after the UPS is disconnected from the mains, the command "shutdown -h now" or "telinit 0" is send to the computer? I have already checked that when the ups is connected to the main, the command "upsc [EMAIL PROTECTED] ups.status" gives "OL", and when it is disconnected from the mains, the same command gives "OB BOOST". MINSUPPLIES 1 SHUTDOWNCMD "/sbin/shutdown -h now" POLLFREQ 5 POLLFREQALERT 5 HOSTSYNC 0 DEADTIME 15 POWERDOWNFLAG /etc/killpower NOTIFYMSG ONLINE "UPS %s is getting line power" NOTIFYMSG ONBATT "Someone pulled the plug on %s" RBWARNTIME 43200 NOCOMMWARNTIME 300 FINALDELAY 0 What shall I do so that when I disconnect the UPS from the mains, I get the notify messages and the shutdown command is executed? I experimented with the current configuration, disconnecting the UPS from the mains, but I neither got any messages, nor the PC shutdown. I waited for about a minute and a half. -- End of the mail of Martin Did you started upsmon with a debug level ? If so, it don't become a daemon and don't write "Startup succesfull" in syslog. For mybox upsd[100]: Client [EMAIL PROTECTED] logged into UPS [myupsname], I saw the function that print this message, but I didn't find any place where she is called. I'm quite new in the NUT developer team, so I don't know why this function is not used, or no longer used. Perhaps another function has been made and is used. So it is probably that the documentation is not up to date with the software, or that modification of the software didn't kept this behavior. Can someone the know upsd and upsmon functionment better than me confirm this point ? If there was a change, shouldn't we restore this behaviour ? For your others problems : Do you run upsmon as root ? To display the messages, upsmon use wall. Depending of the user used to send it, of the configuration of your system, it may not be displayed correctly. I remember there was discusion about this point but don't find the link again... Here are some others links that could interest you : http://www.webservertalk.com/archive245-2005-12-1328449.html http://www.networkupstools.org/doc/1.4.0/osd-notify.html For the shutdown, upsmon normally start the shutdwon command not if the UPS is OnBatt (OB), but when it reach critical state : OnBatt and LowBatt at the same time. And as I hope for you your UPS can be on battery for one minute and a half without being low battery, it is normal your system didn't shuted down Cheer, jonathan Dion _______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
