Hi Peter,
I tried the new version, and I'm having the same problem. Here is
some output:
ups.conf:
[myups]
driver = newhidups
port = auto
desc = "Tripp Lite SMART1200LCD"
"lsusb
Bus 005 Device 007: ID 03f0:2f11 Hewlett-Packard
Bus 005 Device 003: ID 05e3:0605 Genesys Logic, Inc. USB 2.0 Hub [ednet]
Bus 005 Device 004: ID 045e:0039 Microsoft Corp. IntelliMouse Optical
Bus 005 Device 001: ID 0000:0000
Bus 004 Device 001: ID 0000:0000
Bus 001 Device 009: ID 09ae:2005 Tripp Lite
Bus 001 Device 005: ID 045e:001d Microsoft Corp. Natural Keyboard Pro
Bus 001 Device 004: ID 0451:1446 Texas Instruments, Inc. TUSB2040/2070 Hub
Bus 001 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
"
"./newhidups start
Network UPS Tools: New USB/HID UPS driver 0.28 (2.0.4)
No matching USB/HID UPS found
[EMAIL PROTECTED]:/lib/nut$ ./newhidups start
Network UPS Tools: New USB/HID UPS driver 0.28 (2.0.4)
No matching USB/HID UPS found"
" ./tripplite_usb start
Network UPS Tools - Tripp Lite OMNIVS and SMARTPRO driver 0.6 (2.0.4)
Warning: This is an experimental driver.
Some features may not function correctly.
No matching USB/HID UPS found
"
~Brian Foster
Peter Selinger wrote:
Hi Brian,
Tripp Lite support for this model was only added in the last few
weeks; your NUT 2.0.3 is too old. You should get the very latest
development version from the SVN repository. Follow the instructions
on http://eu1.networkupstools.org/source.html under "Development
Tree".
You should then use the newhidups driver. -- Peter
Brian Foster wrote:
Hi,
I am new to this list, so I apologize if I make any mistakes in posting.
I am trying to set up nut with my Tripp Lite SMART 1200LCD. I looked on
the compatability page, and some Tripp Lite models were supported, so I
decided to try out mine. I have tried both USB and serial connections,
and neither have worked. I am just wondering if this is a problem with
nut supporting my model, or if it is a larger problem with my
installation (hopefully the latter). Any help would be appreciated.
Thanks.
In the following outputs, I deleted the entries for the USB controller
and USB hubs in the interest of space.
"sudo /lib/nut/tripplite_usb -u root -DDDDD auto
Network UPS Tools - Tripp Lite OMNIVS and SMARTPRO driver 0.6 (2.0.3)
Warning: This is an experimental driver.
Some features may not function correctly.
...
Checking device (045E/0039) (005/004)
- VendorID: 045e
- ProductID: 0039
- Manufacturer: Microsoft
- Product: Microsoft 5-Button Mouse with IntelliEye(TM)
- Serial Number: unknown
- Bus: 005
Trying to match device
Device does not match - skipping
...
Checking device (09AE/2005) (001/006)
- VendorID: 09ae
- ProductID: 2005
- Manufacturer: Tripp Lite
- Product: TRIPP LITE UPS
- Serial Number: 692199 B
- Bus: 001
Trying to match device
Device does not match - skipping
...
No appropriate HID device found
No matching USB/HID UPS found"
"sudo /lib/nut/newhidups -u root -DDDDD auto
Network UPS Tools: New USB/HID UPS driver 0.28 (2.0.3)
debug level is '5'
...
Checking device (045E/0039) (005/004)
- VendorID: 045e
- ProductID: 0039
- Manufacturer: Microsoft
- Product: Microsoft 5-Button Mouse with IntelliEye(TM)
- Serial Number: unknown
- Bus: 005
Trying to match device
Device does not match - skipping
...
Checking device (09AE/2005) (001/006)
- VendorID: 09ae
- ProductID: 2005
- Manufacturer: Tripp Lite
- Product: TRIPP LITE UPS
- Serial Number: 692199 B
- Bus: 001
Trying to match device
Device does not match - skipping
...
No appropriate HID device found
No matching USB/HID UPS found"
--
~Brian Foster
_______________________________________________
Nut-upsuser mailing list
[email protected]
http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
_______________________________________________
Nut-upsuser mailing list
[email protected]
http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
