Oops, was supposed to send that to the list. ---------- Forwarded message ---------- From: Hans Fugal <[EMAIL PROTECTED]> Date: Sep 8, 2006 8:05 PM Subject: Re: [Nut-upsuser] Tripp Lite OMNI900LCD
Thanks, SVN newhidups driver seems to be working fine. Here's the upsc output. I had to specify the productid in the config file in order for the -a flag to work, that's probably undesirable. battery.charge: 100 battery.type: PbAc battery.voltage: 0.0 battery.voltage.nominal: 12.0 driver.name: newhidups driver.parameter.port: /dev/usb/hiddev0 driver.parameter.productid: 2005 driver.version: 2.1.0 driver.version.data: TrippLite HID 0.1 (experimental) driver.version.internal: 0.30 input.frequency: 59.9 input.voltage: 119.0 input.voltage.nominal: 120 output.frequency.nominal: 60 output.voltage: 166.0 output.voltage.nominal: 120 ups.beeper.status: enabled ups.delay.reboot: 65535 ups.delay.shutdown: 65535 ups.mfr: Tripp Lite ups.model: TRIPP LITE UPS ups.power.nominal: 900 ups.serial: 692195 B ups.status: OL CHRG ups.test.result: Done and passed Two generic items to report. First, configure (or whatever) isn't processing the files scripts/hotplug-ng/*.in . Second, on recent 2.6 kernels you don't need the hotplug file at all, just the udev rules file. udev has completely superceded hotplug. On 9/8/06, Peter Selinger <[EMAIL PROTECTED]> wrote:
OK, in any case, once Hans gets the development version of NUT, he can then produce enough debugging output so that we can hopefully support the model. -- Peter Marc Collin wrote: > > Le vendredi 8 septembre 2006 15:35, Peter Selinger a =E9crit=A0: > > Charles Lepple wrote: > > > On 9/8/06, Hans Fugal <[EMAIL PROTECTED]> wrote: > > > > I have a Tripp Lite OMNI900LCD. > > > > ... > > > > I can't get newhidups to recognize it at all. > > > > > > Support for newer Tripp-Lite USB/HID models is still in the > > > development tree (the trunk in SVN). Instructions for grabbing it via > > > SVN are here: > > > > > > http://www.networkupstools.org/source.html > > > > > > This will hopefully make it into the 2.0.5 release, but I imagine > > > there is a bit of backporting to do. > > > > yes, indeed, I added support for a Tripp Lite ONMI1000LCD to the > > development tree a while ago; I assume this is similar enough to your > > Tripp Lite OMNI900LCD so that it should also work. The driver is > > newhidups. -- Peter > > when i contacted tripp lite, they said me omni900lcd use the same hid table= > =20 > then ripp Lite OMNIVS or ripp Lite SmartUPS don't remember > > _______________________________________________ > Nut-upsuser mailing list > [email protected] > http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser >
-- Hans Fugal Fugal Computing -- Hans Fugal Fugal Computing _______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
