On 6/3/07, dcw <[EMAIL PROTECTED]> wrote: > > > > Using the same version of nut with the same config files on CentOS5, I > > > > get the following error output from 'upsdrvctl':
ah, I read that as "same config files as on CentOS5". Sorry. > > The command '[root]->l /proc/bus/usb/001' displays: > > > > total 0 > > -rw-r--r-- 1 root root 43 May 28 07:26 001 > > -rw-r--r-- 1 root root 57 May 28 07:26 003 > > -rw-r--r-- 1 ups ups 52 Jun 3 14:22 005 > > > > The last entry appears to be the UPS as that is the time I un-pluged and > > re-pluged the ups. The udev (hotplug-ng) files should fix this. You probably know better than I do which versions of RHEL and Fedora this release of CentOS is closest to, and I know we've had a few discussions about this on the lists. > This particular Belkin device (050d/0375) is not (or perhaps not yet) > supported by newhidups. Try running the driver with the '-x productid=0375' > option. Please report your results to the NUT developer's mailing list. This is a safety net so that we don't try to send UPS commands to a non-UPS Belkin device. You can either add "-x productid=0375" to the command line, or add "productid=0375" to the ups.conf section for this ups. Since you said this worked under 2.0.4 on Mandriva, I will suggest that this product ID be added to the driver for the next release. (The 2.0.4 Belkin HID driver apparently didn't check the VID at all, just the PID.) -- - Charles Lepple _______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
