Den Friday 21 September 2007 10.28.21 skrev [EMAIL PROTECTED]: > Hi all, >
Hi Asmo, > [EMAIL PROTECTED]:/home/juuri# upsdrvctl -u root start > Network UPS Tools - UPS driver controller 2.0.3 > Network UPS Tools - BCMXCP UPS driver 0.10 (2.0.3) > > Communications with UPS lost: Error executing command > Communications with UPS lost: Error executing command > Communications with UPS lost: Error executing command > Communications with UPS re-established > Connected to UPS on /dev/ttyS0 baudrate: 9600 > Model = PW5115 750i 750VA > Firmware = 01.00 > Shutdown delay = 120 seconds > To remove this startup error's, enter the baud_rate into the ups.conf > a. ups.conf > > [powerware] > driver = bcmxcp > port = /dev/ttyS0 baud_rate = 9600 Then it connect directly on 9600 bps. Regards Kjell _______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
