Hello....
Kjell Claesson wrote:
> Then you should get new version of nut as 2.0.4 is past date.
I have updated to nut 2.2.0-1 as suggested. Unfortunately I still get the same
type of errors:
Network UPS Tools - UPS driver controller 2.2.0-
Network UPS Tools - BCMXCP UPS driver 0.11 (2.2.0-)
Warning: This is an experimental driver.
Some features may not function correctly.
Model = PW9120 3000VA
Firmware = Cont:02.60 Inve:02.60
Shutdown delay = 120 seconds
Communications with UPS lost: Receive error (Request command): BLOCK: 17,
COMMAND: 35!
Communications with UPS lost: Receive error (Request command): COMMAND: 33
RECONNECT USB DEVICE
Communications with UPS lost: Receive error (Request command): COMMAND: 33
RECONNECT USB DEVICE
My ups.conf looks like this:
[ups1]
driver = bcmxcp_usb
port = auto
desc = "PowerWare 9120"
Thanks,
Tobias
_______________________________________________
Nut-upsuser mailing list
Nut-upsuser@lists.alioth.debian.org
http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
