On Thu, Feb 07, 2008 at 08:24:13AM +0100, Arjen de Korte wrote: > > The previous driver would stop by typing a CTRL-C when > > running interactively in debug mode. The new driver will not > > respond to a CTRL-C. It does not respond to a "kill -1", > > "kill -2" or a "kill -15" either (Which may or may not be > > OK). > > It *will* respond to CTRL-C, but due to the increased debug output, it > behaves very sluggish, so you may need to try a couple of times before it > gets it. >
Even without the -D switch it does not quit with CTRL-C, even when I try typing CTRL-C many times. I tried in a virtual console just in case there was somthing weird about an xterm.... that didn't work either. This may be something with specific to the debian(testing) package I'm using. The following output is without a debug switch: # /lib/nut/usbhid-ups -u root -a trippy Network UPS Tools: 0.29 USB communication driver - core 0.32 (2.2.1-) Using subdriver: TrippLite HID 0.2 (experimental) HIDGetDataValue: Value too large for defined data type Killed Here is a dump from the following command: /lib/nut/usbhid-ups -u root -DDD -a trippy > hid.out 2>&1 debug level is '3' upsdrv_initups... Checking device (0000/0000) (004/001) - VendorID: 0000 - ProductID: 0000 - Manufacturer: Linux 2.6.22-3-686 ehci_hcd - Product: EHCI Host Controller - Serial Number: 0000:00:03.3 - Bus: 004 Trying to match device Device does not match - skipping Checking device (0000/0000) (002/001) - VendorID: 0000 - ProductID: 0000 - Manufacturer: Linux 2.6.22-3-686 ohci_hcd - Product: OHCI Host Controller - Serial Number: 0000:00:03.1 - Bus: 002 Trying to match device Device does not match - skipping Checking device (046D/C50E) (003/002) - VendorID: 046d - ProductID: c50e - Manufacturer: Logitech - Product: USB RECEIVER - Serial Number: unknown - Bus: 003 Trying to match device Device does not match - skipping Checking device (0000/0000) (003/001) - VendorID: 0000 - ProductID: 0000 - Manufacturer: Linux 2.6.22-3-686 ohci_hcd - Product: OHCI Host Controller - Serial Number: 0000:00:03.2 - Bus: 003 Trying to match device Device does not match - skipping Checking device (09AE/2005) (001/003) - VendorID: 09ae - ProductID: 2005 - Manufacturer: Tripp Lite - Product: TRIPP LITE UPS - Serial Number: 692195 B - Bus: 001 Trying to match device Device matches HID descriptor, method 1: (9 bytes) => 09 21 10 01 00 01 22 cb 01 HID descriptor, method 2: (9 bytes) => 09 21 10 01 00 01 22 6a 02 Warning: two different HID descriptors retrieved (Reportlen = 459 vs. 618) HID descriptor length 618 Report Descriptor size = 618 Report Descriptor: (618 bytes) => 05 84 09 04 a1 01 09 24 a1 02 05 84 85 28 09 fe 75 08 95 01 26 ff 00 15 00 b1 03 85 29 09 ff b1 03 85 2b 09 fd b1 03 09 1a a1 02 09 40 85 30 b1 83 c0 75 08 95 01 26 ff 00 85 11 09 5a b1 82 05 85 95 01 75 08 26 ff 00 15 00 85 2a 09 89 b1 03 85 33 09 2c b1 03 25 64 85 34 09 66 81 a2 85 34 09 66 b1 a2 85 37 09 67 b1 03 05 84 09 02 a1 02 25 01 75 01 85 32 05 84 95 01 09 69 81 a2 09 d0 81 a2 95 03 09 44 09 45 09 4b 81 a2 95 03 81 01 85 32 05 84 75 01 95 01 09 69 b1 a2 05 85 09 d0 b1 a2 95 03 09 44 09 45 09 4b b1 a2 95 03 b1 01 c0 c0 05 84 09 10 a1 02 09 12 a1 02 85 04 09 40 75 10 95 01 27 ff ff 00 00 b1 02 75 08 05 84 09 02 a1 02 85 23 05 85 75 01 25 01 95 03 09 44 09 45 09 4b b1 82 95 05 b1 01 c0 c0 05 84 95 01 75 08 26 ff 00 09 58 85 10 b1 82 c0 05 84 09 1e a1 02 95 01 75 08 26 ff 00 85 01 09 40 b1 03 85 02 09 42 b1 03 05 84 85 03 09 43 75 10 95 01 27 ff ff 00 00 b1 03 c0 05 84 95 01 75 08 15 00 26 ff 00 09 18 a1 02 09 20 a1 02 75 08 15 00 25 01 95 01 75 10 27 ff ff 00 00 15 00 85 15 09 57 b1 82 75 08 15 00 26 ff 00 06 ff ff 85 51 09 91 b1 82 85 52 09 92 b1 82 85 b6 09 c7 b1 82 c0 c0 06 ff ff 09 10 a1 81 75 10 95 01 27 ff ff 00 00 85 6c 09 7d b1 03 c0 06 ff ff 09 15 a1 81 75 08 95 01 26 ff 00 15 00 85 96 09 c0 b1 02 75 20 85 b4 09 d2 b1 02 75 10 85 97 09 c1 b1 02 75 08 85 98 09 c2 b1 02 75 10 85 99 09 c3 b1 02 85 9b 09 c5 b1 02 75 20 85 9a 09 c4 b1 02 c0 05 84 09 24 a1 02 85 31 09 30 75 08 95 01 26 ff 00 15 00 b1 03 c0 09 10 a1 02 09 12 a1 02 85 20 09 30 75 10 27 ff ff 00 00 b1 02 c0 c0 09 16 a1 02 09 1a a1 02 85 18 55 0f 09 30 b1 82 85 19 09 32 b1 82 c0 55 00 85 22 09 02 a1 02 75 01 95 03 25 01 05 84 09 63 09 6f 09 6e b1 82 95 01 b1 03 09 65 b1 82 09 6d 95 01 b1 03 09 67 09 62 95 02 b1 82 95 06 b1 03 95 01 09 72 b1 82 95 01 b1 03 c0 c0 05 84 09 18 a1 02 09 20 a1 02 75 10 95 01 15 00 27 ff ff 00 00 85 17 09 55 b1 82 c0 c0 c0 Using subdriver: TrippLite HID 0.2 (experimental) Report[get]: (2 bytes) => 28 01 Path: UPS.PowerSummary.iProduct, Type: Feature, ReportID: 0x28, Offset: 0, Size: 8, Value: 1.000000 Report[get]: (2 bytes) => 29 02 Path: UPS.PowerSummary.iSerialNumber, Type: Feature, ReportID: 0x29, Offset: 0, Size: 8, Value: 2.000000 Report[get]: (2 bytes) => 2b 03 Path: UPS.PowerSummary.iManufacturer, Type: Feature, ReportID: 0x2b, Offset: 0, Size: 8, Value: 3.000000 Report[get]: (2 bytes) => 30 78 Path: UPS.PowerSummary.Input.ConfigVoltage, Type: Feature, ReportID: 0x30, Offset: 0, Size: 8, Value: 120.000000 Report[get]: (2 bytes) => 11 02 Path: UPS.PowerSummary.AudibleAlarmControl, Type: Feature, ReportID: 0x11, Offset: 0, Size: 8, Value: 2.000000 Report[get]: (2 bytes) => 2a 18 Path: UPS.PowerSummary.iDeviceChemistry, Type: Feature, ReportID: 0x2a, Offset: 0, Size: 8, Value: 24.000000 Report[get]: (2 bytes) => 33 02 Path: UPS.PowerSummary.CapacityMode, Type: Feature, ReportID: 0x33, Offset: 0, Size: 8, Value: 2.000000 Report[get]: (2 bytes) => 34 64 Path: UPS.PowerSummary.RemainingCapacity, Type: Input, ReportID: 0x34, Offset: 0, Size: 8, Value: 100.000000 Report[buf]: (2 bytes) => 34 64 Path: UPS.PowerSummary.RemainingCapacity, Type: Feature, ReportID: 0x34, Offset: 0, Size: 8, Value: 100.000000 Report[get]: (2 bytes) => 37 64 Path: UPS.PowerSummary.FullChargeCapacity, Type: Feature, ReportID: 0x37, Offset: 0, Size: 8, Value: 100.000000 Report[get]: (2 bytes) => 32 06 Path: UPS.PowerSummary.PresentStatus.ShutdownImminent, Type: Input, ReportID: 0x32, Offset: 0, Size: 1, Value: 0.000000 Report[buf]: (2 bytes) => 32 06 Path: UPS.PowerSummary.PresentStatus.TLACPresent, Type: Input, ReportID: 0x32, Offset: 1, Size: 1, Value: 1.000000 Report[buf]: (2 bytes) => 32 06 Path: UPS.PowerSummary.PresentStatus.TLCharging, Type: Input, ReportID: 0x32, Offset: 2, Size: 1, Value: 1.000000 Report[buf]: (2 bytes) => 32 06 Path: UPS.PowerSummary.PresentStatus.TLDischarging, Type: Input, ReportID: 0x32, Offset: 3, Size: 1, Value: 0.000000 Report[buf]: (2 bytes) => 32 06 Path: UPS.PowerSummary.PresentStatus.TLNeedReplacement, Type: Input, ReportID: 0x32, Offset: 4, Size: 1, Value: 0.000000 Report[buf]: (2 bytes) => 32 06 Path: UPS.PowerSummary.PresentStatus.ShutdownImminent, Type: Feature, ReportID: 0x32, Offset: 0, Size: 1, Value: 0.000000 Report[buf]: (2 bytes) => 32 06 Path: UPS.PowerSummary.PresentStatus.ACPresent, Type: Feature, ReportID: 0x32, Offset: 1, Size: 1, Value: 1.000000 Report[buf]: (2 bytes) => 32 06 Path: UPS.PowerSummary.PresentStatus.Charging, Type: Feature, ReportID: 0x32, Offset: 2, Size: 1, Value: 1.000000 Report[buf]: (2 bytes) => 32 06 Path: UPS.PowerSummary.PresentStatus.Discharging, Type: Feature, ReportID: 0x32, Offset: 3, Size: 1, Value: 0.000000 Report[buf]: (2 bytes) => 32 06 Path: UPS.PowerSummary.PresentStatus.NeedReplacement, Type: Feature, ReportID: 0x32, Offset: 4, Size: 1, Value: 0.000000 Report[get]: (3 bytes) => 04 0c 00 Path: UPS.BatterySystem.Battery.ConfigVoltage, Type: Feature, ReportID: 0x04, Offset: 0, Size: 16, Value: 12.000000 Report[get]: (2 bytes) => 23 01 Path: UPS.BatterySystem.Battery.PresentStatus.Charging, Type: Feature, ReportID: 0x23, Offset: 0, Size: 1, Value: 1.000000 Report[buf]: (2 bytes) => 23 01 Path: UPS.BatterySystem.Battery.PresentStatus.Discharging, Type: Feature, ReportID: 0x23, Offset: 1, Size: 1, Value: 0.000000 Report[buf]: (2 bytes) => 23 01 Path: UPS.BatterySystem.Battery.PresentStatus.NeedReplacement, Type: Feature, ReportID: 0x23, Offset: 2, Size: 1, Value: 0.000000 Report[get]: (2 bytes) => 10 00 Path: UPS.BatterySystem.Test, Type: Feature, ReportID: 0x10, Offset: 0, Size: 8, Value: 0.000000 Report[get]: (2 bytes) => 01 78 Path: UPS.Flow.ConfigVoltage, Type: Feature, ReportID: 0x01, Offset: 0, Size: 8, Value: 120.000000 Report[get]: (2 bytes) => 02 3c Path: UPS.Flow.ConfigFrequency, Type: Feature, ReportID: 0x02, Offset: 0, Size: 8, Value: 60.000000 Report[get]: (3 bytes) => 03 e8 03 Path: UPS.Flow.ConfigApparentPower, Type: Feature, ReportID: 0x03, Offset: 0, Size: 16, Value: 1000.000000 Report[get]: (3 bytes) => 15 ff ff Path: UPS.OutletSystem.Outlet.DelayBeforeShutdown, Type: Feature, ReportID: 0x15, Offset: 0, Size: 16, Value: 65535.000000 Report[get]: (2 bytes) => 51 00 Path: UPS.OutletSystem.Outlet.ffff0091, Type: Feature, ReportID: 0x51, Offset: 0, Size: 8, Value: 0.000000 Report[get]: (2 bytes) => 52 00 Path: UPS.OutletSystem.Outlet.ffff0092, Type: Feature, ReportID: 0x52, Offset: 0, Size: 8, Value: 0.000000 Report[get]: (2 bytes) => b6 01 Path: UPS.OutletSystem.Outlet.ffff00c7, Type: Feature, ReportID: 0xb6, Offset: 0, Size: 8, Value: 1.000000 Report[get]: (3 bytes) => 6c 05 20 Path: UPS.ffff0010.[1].ffff007d, Type: Feature, ReportID: 0x6c, Offset: 0, Size: 16, Value: 8197.000000 Report[get]: (2 bytes) => 96 ff Path: UPS.ffff0015.[1].ffff00c0, Type: Feature, ReportID: 0x96, Offset: 0, Size: 8, Value: 255.000000 Report[get]: (5 bytes) => b4 ff 00 00 00 Path: UPS.ffff0015.[1].ffff00d2, Type: Feature, ReportID: 0xb4, Offset: 0, Size: 32, Value: 255.000000 Report[get]: (3 bytes) => 97 ff ff Path: UPS.ffff0015.[1].ffff00c1, Type: Feature, ReportID: 0x97, Offset: 0, Size: 16, Value: 255.000000 Report[get]: (2 bytes) => 98 ff Path: UPS.ffff0015.[1].ffff00c2, Type: Feature, ReportID: 0x98, Offset: 0, Size: 8, Value: 255.000000 Report[get]: (3 bytes) => 99 ff ff Path: UPS.ffff0015.[1].ffff00c3, Type: Feature, ReportID: 0x99, Offset: 0, Size: 16, Value: 255.000000 Report[get]: (3 bytes) => 9b 03 00 Path: UPS.ffff0015.[1].ffff00c5, Type: Feature, ReportID: 0x9b, Offset: 0, Size: 16, Value: 3.000000 Can't retrieve Report 154: Broken pipe Path: UPS.ffff0015.[1].ffff00c4, Type: Feature, ReportID: 0x9a, Offset: 0, Size: 32 Can't retrieve Report 49: Value too large for defined data type Path: UPS.PowerSummary.Voltage, Type: Feature, ReportID: 0x31, Offset: 0, Size: 8 Report[get]: (3 bytes) => 20 86 00 Path: UPS.BatterySystem.Battery.Voltage, Type: Feature, ReportID: 0x20, Offset: 0, Size: 16, Value: 134.000000 Report[get]: (3 bytes) => 18 be 04 Path: UPS.PowerConverter.Input.Voltage, Type: Feature, ReportID: 0x18, Offset: 0, Size: 16, Value: 121.400000 Report[get]: (3 bytes) => 19 56 02 Path: UPS.PowerConverter.Input.Frequency, Type: Feature, ReportID: 0x19, Offset: 0, Size: 16, Value: 59.800000 Report[get]: (3 bytes) => 22 00 00 Path: UPS.PowerConverter.PresentStatus.VoltageOutOfRange, Type: Feature, ReportID: 0x22, Offset: 0, Size: 1, Value: 0.000000 Report[buf]: (3 bytes) => 22 00 00 Path: UPS.PowerConverter.PresentStatus.Buck, Type: Feature, ReportID: 0x22, Offset: 1, Size: 1, Value: 0.000000 Report[buf]: (3 bytes) => 22 00 00 Path: UPS.PowerConverter.PresentStatus.Boost, Type: Feature, ReportID: 0x22, Offset: 2, Size: 1, Value: 0.000000 Report[buf]: (3 bytes) => 22 00 00 Path: UPS.PowerConverter.PresentStatus.Overload, Type: Feature, ReportID: 0x22, Offset: 4, Size: 1, Value: 0.000000 Report[buf]: (3 bytes) => 22 00 00 Path: UPS.PowerConverter.PresentStatus.Used, Type: Feature, ReportID: 0x22, Offset: 5, Size: 1, Value: 0.000000 Report[buf]: (3 bytes) => 22 00 00 Path: UPS.PowerConverter.PresentStatus.OverTemperature, Type: Feature, ReportID: 0x22, Offset: 6, Size: 1, Value: 0.000000 Report[buf]: (3 bytes) => 22 00 00 Path: UPS.PowerConverter.PresentStatus.InternalFailure, Type: Feature, ReportID: 0x22, Offset: 7, Size: 1, Value: 0.000000 Report[buf]: (3 bytes) => 22 00 00 Path: UPS.PowerConverter.PresentStatus.AwaitingPower, Type: Feature, ReportID: 0x22, Offset: 14, Size: 1, Value: 0.000000 Report[get]: (3 bytes) => 17 ff ff Path: UPS.OutletSystem.Outlet.DelayBeforeReboot, Type: Feature, ReportID: 0x17, Offset: 0, Size: 16, Value: 65535.000000 Network UPS Tools: 0.29 USB communication driver - core 0.32 (2.2.1-) Report descriptor retrieved (Reportlen = 618) Found HID device Detected a UPS: Tripp Lite /TRIPP LITE UPS Report[buf]: (2 bytes) => 34 64 Path: UPS.PowerSummary.RemainingCapacity, Type: Feature, ReportID: 0x34, Offset: 0, Size: 8, Value: 100.000000 Report[buf]: (3 bytes) => 20 86 00 Path: UPS.BatterySystem.Battery.Voltage, Type: Feature, ReportID: 0x20, Offset: 0, Size: 16, Value: 134.000000 Report[buf]: (3 bytes) => 04 0c 00 Path: UPS.BatterySystem.Battery.ConfigVoltage, Type: Feature, ReportID: 0x04, Offset: 0, Size: 16, Value: 12.000000 Report[buf]: (2 bytes) => 2a 18 Path: UPS.PowerSummary.iDeviceChemistry, Type: Feature, ReportID: 0x2a, Offset: 0, Size: 8, Value: 24.000000 Report[buf]: (3 bytes) => 15 ff ff Path: UPS.OutletSystem.Outlet.DelayBeforeShutdown, Type: Feature, ReportID: 0x15, Offset: 0, Size: 16, Value: 65535.000000 Report[buf]: (3 bytes) => 17 ff ff Path: UPS.OutletSystem.Outlet.DelayBeforeReboot, Type: Feature, ReportID: 0x17, Offset: 0, Size: 16, Value: 65535.000000 Report[buf]: (2 bytes) => 10 00 Path: UPS.BatterySystem.Test, Type: Feature, ReportID: 0x10, Offset: 0, Size: 8, Value: 0.000000 hu_find_infoval: no matching INFO_* value for this HID value (0) Report[buf]: (2 bytes) => 11 02 Path: UPS.PowerSummary.AudibleAlarmControl, Type: Feature, ReportID: 0x11, Offset: 0, Size: 8, Value: 2.000000 Report[buf]: (3 bytes) => 03 e8 03 Path: UPS.Flow.ConfigApparentPower, Type: Feature, ReportID: 0x03, Offset: 0, Size: 16, Value: 1000.000000 Report[buf]: (2 bytes) => 32 06 Path: UPS.PowerSummary.PresentStatus.ACPresent, Type: Feature, ReportID: 0x32, Offset: 1, Size: 1, Value: 1.000000 Report[buf]: (2 bytes) => 32 06 Path: UPS.PowerSummary.PresentStatus.Discharging, Type: Feature, ReportID: 0x32, Offset: 3, Size: 1, Value: 0.000000 Report[buf]: (2 bytes) => 32 06 Path: UPS.PowerSummary.PresentStatus.Charging, Type: Feature, ReportID: 0x32, Offset: 2, Size: 1, Value: 1.000000 Report[buf]: (2 bytes) => 32 06 Path: UPS.PowerSummary.PresentStatus.ShutdownImminent, Type: Feature, ReportID: 0x32, Offset: 0, Size: 1, Value: 0.000000 Report[buf]: (3 bytes) => 22 00 00 Path: UPS.PowerConverter.PresentStatus.Overload, Type: Feature, ReportID: 0x22, Offset: 4, Size: 1, Value: 0.000000 Report[buf]: (3 bytes) => 22 00 00 Path: UPS.PowerConverter.PresentStatus.VoltageOutOfRange, Type: Feature, ReportID: 0x22, Offset: 0, Size: 1, Value: 0.000000 Report[buf]: (2 bytes) => 32 06 Path: UPS.PowerSummary.PresentStatus.NeedReplacement, Type: Feature, ReportID: 0x32, Offset: 4, Size: 1, Value: 0.000000 Report[buf]: (3 bytes) => 22 00 00 Path: UPS.PowerConverter.PresentStatus.Boost, Type: Feature, ReportID: 0x22, Offset: 2, Size: 1, Value: 0.000000 Report[buf]: (3 bytes) => 22 00 00 Path: UPS.PowerConverter.PresentStatus.Buck, Type: Feature, ReportID: 0x22, Offset: 1, Size: 1, Value: 0.000000 Report[buf]: (3 bytes) => 22 00 00 Path: UPS.PowerConverter.PresentStatus.OverTemperature, Type: Feature, ReportID: 0x22, Offset: 6, Size: 1, Value: 0.000000 Report[buf]: (3 bytes) => 22 00 00 Path: UPS.PowerConverter.PresentStatus.AwaitingPower, Type: Feature, ReportID: 0x22, Offset: 14, Size: 1, Value: 0.000000 Report[buf]: (3 bytes) => 22 00 00 Path: UPS.PowerConverter.PresentStatus.InternalFailure, Type: Feature, ReportID: 0x22, Offset: 7, Size: 1, Value: 0.000000 Report[buf]: (3 bytes) => 18 be 04 Path: UPS.PowerConverter.Input.Voltage, Type: Feature, ReportID: 0x18, Offset: 0, Size: 16, Value: 121.400000 Report[buf]: (2 bytes) => 30 78 Path: UPS.PowerSummary.Input.ConfigVoltage, Type: Feature, ReportID: 0x30, Offset: 0, Size: 8, Value: 120.000000 Report[buf]: (3 bytes) => 19 56 02 Path: UPS.PowerConverter.Input.Frequency, Type: Feature, ReportID: 0x19, Offset: 0, Size: 16, Value: 59.800000 Can't retrieve Report 49: Value too large for defined data type HIDGetDataValue: Value too large for defined data type Report[buf]: (2 bytes) => 01 78 Path: UPS.Flow.ConfigVoltage, Type: Feature, ReportID: 0x01, Offset: 0, Size: 8, Value: 120.000000 Report[buf]: (2 bytes) => 02 3c Path: UPS.Flow.ConfigFrequency, Type: Feature, ReportID: 0x02, Offset: 0, Size: 8, Value: 60.000000 Report[buf]: (2 bytes) => 10 00 Path: UPS.BatterySystem.Test, Type: Feature, ReportID: 0x10, Offset: 0, Size: 8, Value: 0.000000 Report[buf]: (2 bytes) => 10 00 Path: UPS.BatterySystem.Test, Type: Feature, ReportID: 0x10, Offset: 0, Size: 8, Value: 0.000000 Report[buf]: (2 bytes) => 10 00 Path: UPS.BatterySystem.Test, Type: Feature, ReportID: 0x10, Offset: 0, Size: 8, Value: 0.000000 Report[buf]: (3 bytes) => 15 ff ff Path: UPS.OutletSystem.Outlet.DelayBeforeShutdown, Type: Feature, ReportID: 0x15, Offset: 0, Size: 16, Value: 65535.000000 Report[buf]: (3 bytes) => 15 ff ff Path: UPS.OutletSystem.Outlet.DelayBeforeShutdown, Type: Feature, ReportID: 0x15, Offset: 0, Size: 16, Value: 65535.000000 Report[buf]: (3 bytes) => 17 ff ff Path: UPS.OutletSystem.Outlet.DelayBeforeReboot, Type: Feature, ReportID: 0x17, Offset: 0, Size: 16, Value: 65535.000000 Report[buf]: (3 bytes) => 15 ff ff Path: UPS.OutletSystem.Outlet.DelayBeforeShutdown, Type: Feature, ReportID: 0x15, Offset: 0, Size: 16, Value: 65535.000000 Report[buf]: (2 bytes) => 11 02 Path: UPS.PowerSummary.AudibleAlarmControl, Type: Feature, ReportID: 0x11, Offset: 0, Size: 8, Value: 2.000000 Report[buf]: (2 bytes) => 11 02 Path: UPS.PowerSummary.AudibleAlarmControl, Type: Feature, ReportID: 0x11, Offset: 0, Size: 8, Value: 2.000000 Report[buf]: (2 bytes) => 11 02 Path: UPS.PowerSummary.AudibleAlarmControl, Type: Feature, ReportID: 0x11, Offset: 0, Size: 8, Value: 2.000000 Report[buf]: (2 bytes) => 11 02 Path: UPS.PowerSummary.AudibleAlarmControl, Type: Feature, ReportID: 0x11, Offset: 0, Size: 8, Value: 2.000000 Report[buf]: (2 bytes) => 11 02 Path: UPS.PowerSummary.AudibleAlarmControl, Type: Feature, ReportID: 0x11, Offset: 0, Size: 8, Value: 2.000000 upsdrv_initinfo... upsdrv_updateinfo... Report[int]: (2 bytes) => 32 06 Got 8 HID objects... Report[buf]: (2 bytes) => 32 06 Path: UPS.PowerSummary.PresentStatus.ShutdownImminent, Type: Input, ReportID: 0x32, Offset: 0, Size: 1, Value: 0.000000 Report[buf]: (2 bytes) => 32 06 Path: UPS.PowerSummary.PresentStatus.TLACPresent, Type: Input, ReportID: 0x32, Offset: 1, Size: 1, Value: 1.000000 Report[buf]: (2 bytes) => 32 06 Path: UPS.PowerSummary.PresentStatus.TLCharging, Type: Input, ReportID: 0x32, Offset: 2, Size: 1, Value: 1.000000 Report[buf]: (2 bytes) => 32 06 Path: UPS.PowerSummary.PresentStatus.TLDischarging, Type: Input, ReportID: 0x32, Offset: 3, Size: 1, Value: 0.000000 Report[buf]: (2 bytes) => 32 06 Path: UPS.PowerSummary.PresentStatus.TLNeedReplacement, Type: Input, ReportID: 0x32, Offset: 4, Size: 1, Value: 0.000000 Report[buf]: (2 bytes) => 32 06 Path: UPS.PowerSummary.PresentStatus.00000000, Type: Input, ReportID: 0x32, Offset: 5, Size: 1, Value: 0.000000 NUT doesn't use this HID object Report[buf]: (2 bytes) => 32 06 Path: UPS.PowerSummary.PresentStatus.00000000, Type: Input, ReportID: 0x32, Offset: 6, Size: 1, Value: 0.000000 NUT doesn't use this HID object Report[buf]: (2 bytes) => 32 06 Path: UPS.PowerSummary.PresentStatus.00000000, Type: Input, ReportID: 0x32, Offset: 7, Size: 1, Value: 0.000000 NUT doesn't use this HID object Report[int]: (2 bytes) => 34 64 Got 1 HID objects... Report[buf]: (2 bytes) => 34 64 Path: UPS.PowerSummary.RemainingCapacity, Type: Input, ReportID: 0x34, Offset: 0, Size: 8, Value: 100.000000 Report[int]: (2 bytes) => 32 06 Got 8 HID objects... Report[buf]: (2 bytes) => 32 06 Path: UPS.PowerSummary.PresentStatus.ShutdownImminent, Type: Input, ReportID: 0x32, Offset: 0, Size: 1, Value: 0.000000 Report[buf]: (2 bytes) => 32 06 Path: UPS.PowerSummary.PresentStatus.TLACPresent, Type: Input, ReportID: 0x32, Offset: 1, Size: 1, Value: 1.000000 Report[buf]: (2 bytes) => 32 06 Path: UPS.PowerSummary.PresentStatus.TLCharging, Type: Input, ReportID: 0x32, Offset: 2, Size: 1, Value: 1.000000 Report[buf]: (2 bytes) => 32 06 Path: UPS.PowerSummary.PresentStatus.TLDischarging, Type: Input, ReportID: 0x32, Offset: 3, Size: 1, Value: 0.000000 Report[buf]: (2 bytes) => 32 06 Path: UPS.PowerSummary.PresentStatus.TLNeedReplacement, Type: Input, ReportID: 0x32, Offset: 4, Size: 1, Value: 0.000000 Report[buf]: (2 bytes) => 32 06 Path: UPS.PowerSummary.PresentStatus.00000000, Type: Input, ReportID: 0x32, Offset: 5, Size: 1, Value: 0.000000 NUT doesn't use this HID object Report[buf]: (2 bytes) => 32 06 Path: UPS.PowerSummary.PresentStatus.00000000, Type: Input, ReportID: 0x32, Offset: 6, Size: 1, Value: 0.000000 NUT doesn't use this HID object Report[buf]: (2 bytes) => 32 06 Path: UPS.PowerSummary.PresentStatus.00000000, Type: Input, ReportID: 0x32, Offset: 7, Size: 1, Value: 0.000000 NUT doesn't use this HID object Report[int]: (2 bytes) => 34 64 Got 1 HID objects... Report[buf]: (2 bytes) => 34 64 Path: UPS.PowerSummary.RemainingCapacity, Type: Input, ReportID: 0x34, Offset: 0, Size: 8, Value: 100.000000 Report[int]: (2 bytes) => 32 06 Got 8 HID objects... Report[buf]: (2 bytes) => 32 06 Path: UPS.PowerSummary.PresentStatus.ShutdownImminent, Type: Input, ReportID: 0x32, Offset: 0, Size: 1, Value: 0.000000 Report[buf]: (2 bytes) => 32 06 Path: UPS.PowerSummary.PresentStatus.TLACPresent, Type: Input, ReportID: 0x32, Offset: 1, Size: 1, Value: 1.000000 Report[buf]: (2 bytes) => 32 06 Path: UPS.PowerSummary.PresentStatus.TLCharging, Type: Input, ReportID: 0x32, Offset: 2, Size: 1, Value: 1.000000 Report[buf]: (2 bytes) => 32 06 Path: UPS.PowerSummary.PresentStatus.TLDischarging, Type: Input, ReportID: 0x32, Offset: 3, Size: 1, Value: 0.000000 Report[buf]: (2 bytes) => 32 06 Path: UPS.PowerSummary.PresentStatus.TLNeedReplacement, Type: Input, ReportID: 0x32, Offset: 4, Size: 1, Value: 0.000000 Report[buf]: (2 bytes) => 32 06 Path: UPS.PowerSummary.PresentStatus.00000000, Type: Input, ReportID: 0x32, Offset: 5, Size: 1, Value: 0.000000 NUT doesn't use this HID object Report[buf]: (2 bytes) => 32 06 Path: UPS.PowerSummary.PresentStatus.00000000, Type: Input, ReportID: 0x32, Offset: 6, Size: 1, Value: 0.000000 NUT doesn't use this HID object Report[buf]: (2 bytes) => 32 06 Path: UPS.PowerSummary.PresentStatus.00000000, Type: Input, ReportID: 0x32, Offset: 7, Size: 1, Value: 0.000000 NUT doesn't use this HID object Report[int]: (2 bytes) => 34 64 Got 1 HID objects... Report[buf]: (2 bytes) => 34 64 Path: UPS.PowerSummary.RemainingCapacity, Type: Input, ReportID: 0x34, Offset: 0, Size: 8, Value: 100.000000 Report[int]: (2 bytes) => 32 06 Got 8 HID objects... Report[buf]: (2 bytes) => 32 06 Path: UPS.PowerSummary.PresentStatus.ShutdownImminent, Type: Input, ReportID: 0x32, Offset: 0, Size: 1, Value: 0.000000 Report[buf]: (2 bytes) => 32 06 Path: UPS.PowerSummary.PresentStatus.TLACPresent, Type: Input, ReportID: 0x32, Offset: 1, Size: 1, Value: 1.000000 Report[buf]: (2 bytes) => 32 06 Path: UPS.PowerSummary.PresentStatus.TLCharging, Type: Input, ReportID: 0x32, Offset: 2, Size: 1, Value: 1.000000 Report[buf]: (2 bytes) => 32 06 Path: UPS.PowerSummary.PresentStatus.TLDischarging, Type: Input, ReportID: 0x32, Offset: 3, Size: 1, Value: 0.000000 Report[buf]: (2 bytes) => 32 06 Path: UPS.PowerSummary.PresentStatus.TLNeedReplacement, Type: Input, ReportID: 0x32, Offset: 4, Size: 1, Value: 0.000000 Report[buf]: (2 bytes) => 32 06 Path: UPS.PowerSummary.PresentStatus.00000000, Type: Input, ReportID: 0x32, Offset: 5, Size: 1, Value: 0.000000 NUT doesn't use this HID object Report[buf]: (2 bytes) => 32 06 Path: UPS.PowerSummary.PresentStatus.00000000, Type: Input, ReportID: 0x32, Offset: 6, Size: 1, Value: 0.000000 NUT doesn't use this HID object Report[buf]: (2 bytes) => 32 06 Path: UPS.PowerSummary.PresentStatus.00000000, Type: Input, ReportID: 0x32, Offset: 7, Size: 1, Value: 0.000000 NUT doesn't use this HID object Report[int]: (2 bytes) => 34 64 Got 1 HID objects... Report[buf]: (2 bytes) => 34 64 Path: UPS.PowerSummary.RemainingCapacity, Type: Input, ReportID: 0x34, Offset: 0, Size: 8, Value: 100.000000 Report[int]: (2 bytes) => 32 06 Got 8 HID objects... Report[buf]: (2 bytes) => 32 06 Path: UPS.PowerSummary.PresentStatus.ShutdownImminent, Type: Input, ReportID: 0x32, Offset: 0, Size: 1, Value: 0.000000 Report[buf]: (2 bytes) => 32 06 Path: UPS.PowerSummary.PresentStatus.TLACPresent, Type: Input, ReportID: 0x32, Offset: 1, Size: 1, Value: 1.000000 Report[buf]: (2 bytes) => 32 06 Path: UPS.PowerSummary.PresentStatus.TLCharging, Type: Input, ReportID: 0x32, Offset: 2, Size: 1, Value: 1.000000 Report[buf]: (2 bytes) => 32 06 Path: UPS.PowerSummary.PresentStatus.TLDischarging, Type: Input, ReportID: 0x32, Offset: 3, Size: 1, Value: 0.000000 Report[buf]: (2 bytes) => 32 06 Path: UPS.PowerSummary.PresentStatus.TLNeedReplacement, Type: Input, ReportID: 0x32, Offset: 4, Size: 1, Value: 0.000000 Report[buf]: (2 bytes) => 32 06 Path: UPS.PowerSummary.PresentStatus.00000000, Type: Input, ReportID: 0x32, Offset: 5, Size: 1, Value: 0.000000 NUT doesn't use this HID object Report[buf]: (2 bytes) => 32 06 Path: UPS.PowerSummary.PresentStatus.00000000, Type: Input, ReportID: 0x32, Offset: 6, Size: 1, Value: 0.000000 NUT doesn't use this HID object Report[buf]: (2 bytes) => 32 06 Path: UPS.PowerSummary.PresentStatus.00000000, Type: Input, ReportID: 0x32, Offset: 7, Size: 1, Value: 0.000000 NUT doesn't use this HID object Report[int]: (2 bytes) => 34 64 Got 1 HID objects... Report[buf]: (2 bytes) => 34 64 Path: UPS.PowerSummary.RemainingCapacity, Type: Input, ReportID: 0x34, Offset: 0, Size: 8, Value: 100.000000 Report[int]: (2 bytes) => 32 06 Got 8 HID objects... Report[buf]: (2 bytes) => 32 06 Path: UPS.PowerSummary.PresentStatus.ShutdownImminent, Type: Input, ReportID: 0x32, Offset: 0, Size: 1, Value: 0.000000 Report[buf]: (2 bytes) => 32 06 Path: UPS.PowerSummary.PresentStatus.TLACPresent, Type: Input, ReportID: 0x32, Offset: 1, Size: 1, Value: 1.000000 Report[buf]: (2 bytes) => 32 06 Path: UPS.PowerSummary.PresentStatus.TLCharging, Type: Input, ReportID: 0x32, Offset: 2, Size: 1, Value: 1.000000 Report[buf]: (2 bytes) => 32 06 Path: UPS.PowerSummary.PresentStatus.TLDischarging, Type: Input, ReportID: 0x32, Offset: 3, Size: 1, Value: 0.000000 Report[buf]: (2 bytes) => 32 06 Path: UPS.PowerSummary.PresentStatus.TLNeedReplacement, Type: Input, ReportID: 0x32, Offset: 4, Size: 1, Value: 0.000000 Report[buf]: (2 bytes) => 32 06 Path: UPS.PowerSummary.PresentStatus.00000000, Type: Input, ReportID: 0x32, Offset: 5, Size: 1, Value: 0.000000 NUT doesn't use this HID object Report[buf]: (2 bytes) => 32 06 Path: UPS.PowerSummary.PresentStatus.00000000, Type: Input, ReportID: 0x32, Offset: 6, Size: 1, Value: 0.000000 NUT doesn't use this HID object Report[buf]: (2 bytes) => 32 06 Path: UPS.PowerSummary.PresentStatus.00000000, Type: Input, ReportID: 0x32, Offset: 7, Size: 1, Value: 0.000000 NUT doesn't use this HID object Report[int]: (2 bytes) => 34 64 Got 1 HID objects... Report[buf]: (2 bytes) => 34 64 Path: UPS.PowerSummary.RemainingCapacity, Type: Input, ReportID: 0x34, Offset: 0, Size: 8, Value: 100.000000 Report[int]: (2 bytes) => 32 06 Got 8 HID objects... Report[buf]: (2 bytes) => 32 06 Path: UPS.PowerSummary.PresentStatus.ShutdownImminent, Type: Input, ReportID: 0x32, Offset: 0, Size: 1, Value: 0.000000 Report[buf]: (2 bytes) => 32 06 Path: UPS.PowerSummary.PresentStatus.TLACPresent, Type: Input, ReportID: 0x32, Offset: 1, Size: 1, Value: 1.000000 Report[buf]: (2 bytes) => 32 06 Path: UPS.PowerSummary.PresentStatus.TLCharging, Type: Input, ReportID: 0x32, Offset: 2, Size: 1, Value: 1.000000 Report[buf]: (2 bytes) => 32 06 Path: UPS.PowerSummary.PresentStatus.TLDischarging, Type: Input, ReportID: 0x32, Offset: 3, Size: 1, Value: 0.000000 Report[buf]: (2 bytes) => 32 06 Path: UPS.PowerSummary.PresentStatus.TLNeedReplacement, Type: Input, ReportID: 0x32, Offset: 4, Size: 1, Value: 0.000000 Report[buf]: (2 bytes) => 32 06 Path: UPS.PowerSummary.PresentStatus.00000000, Type: Input, ReportID: 0x32, Offset: 5, Size: 1, Value: 0.000000 NUT doesn't use this HID object Report[buf]: (2 bytes) => 32 06 Path: UPS.PowerSummary.PresentStatus.00000000, Type: Input, ReportID: 0x32, Offset: 6, Size: 1, Value: 0.000000 NUT doesn't use this HID object Report[buf]: (2 bytes) => 32 06 Path: UPS.PowerSummary.PresentStatus.00000000, Type: Input, ReportID: 0x32, Offset: 7, Size: 1, Value: 0.000000 NUT doesn't use this HID object Report[int]: (2 bytes) => 34 64 Got 1 HID objects... Report[buf]: (2 bytes) => 34 64 Path: UPS.PowerSummary.RemainingCapacity, Type: Input, ReportID: 0x34, Offset: 0, Size: 8, Value: 100.000000 Report[int]: (2 bytes) => 32 06 Got 8 HID objects... Report[buf]: (2 bytes) => 32 06 Path: UPS.PowerSummary.PresentStatus.ShutdownImminent, Type: Input, ReportID: 0x32, Offset: 0, Size: 1, Value: 0.000000 Report[buf]: (2 bytes) => 32 06 Path: UPS.PowerSummary.PresentStatus.TLACPresent, Type: Input, ReportID: 0x32, Offset: 1, Size: 1, Value: 1.000000 Report[buf]: (2 bytes) => 32 06 Path: UPS.PowerSummary.PresentStatus.TLCharging, Type: Input, ReportID: 0x32, Offset: 2, Size: 1, Value: 1.000000 Report[buf]: (2 bytes) => 32 06 Path: UPS.PowerSummary.PresentStatus.TLDischarging, Type: Input, ReportID: 0x32, Offset: 3, Size: 1, Value: 0.000000 Report[buf]: (2 bytes) => 32 06 Path: UPS.PowerSummary.PresentStatus.TLNeedReplacement, Type: Input, ReportID: 0x32, Offset: 4, Size: 1, Value: 0.000000 Report[buf]: (2 bytes) => 32 06 Path: UPS.PowerSummary.PresentStatus.00000000, Type: Input, ReportID: 0x32, Offset: 5, Size: 1, Value: 0.000000 NUT doesn't use this HID object Report[buf]: (2 bytes) => 32 06 Path: UPS.PowerSummary.PresentStatus.00000000, Type: Input, ReportID: 0x32, Offset: 6, Size: 1, Value: 0.000000 NUT doesn't use this HID object Report[buf]: (2 bytes) => 32 06 Path: UPS.PowerSummary.PresentStatus.00000000, Type: Input, ReportID: 0x32, Offset: 7, Size: 1, Value: 0.000000 NUT doesn't use this HID object Report[int]: (2 bytes) => 34 64 Got 1 HID objects... Report[buf]: (2 bytes) => 34 64 Path: UPS.PowerSummary.RemainingCapacity, Type: Input, ReportID: 0x34, Offset: 0, Size: 8, Value: 100.000000 Report[int]: (2 bytes) => 32 06 Got 8 HID objects... Report[buf]: (2 bytes) => 32 06 Path: UPS.PowerSummary.PresentStatus.ShutdownImminent, Type: Input, ReportID: 0x32, Offset: 0, Size: 1, Value: 0.000000 Report[buf]: (2 bytes) => 32 06 Path: UPS.PowerSummary.PresentStatus.TLACPresent, Type: Input, ReportID: 0x32, Offset: 1, Size: 1, Value: 1.000000 Report[buf]: (2 bytes) => 32 06 Path: UPS.PowerSummary.PresentStatus.TLCharging, Type: Input, ReportID: 0x32, Offset: 2, Size: 1, Value: 1.000000 Report[buf]: (2 bytes) => 32 06 Path: UPS.PowerSummary.PresentStatus.TLDischarging, Type: Input, ReportID: 0x32, Offset: 3, Size: 1, Value: 0.000000 Report[buf]: (2 bytes) => 32 06 Path: UPS.PowerSummary.PresentStatus.TLNeedReplacement, Type: Input, ReportID: 0x32, Offset: 4, Size: 1, Value: 0.000000 Report[buf]: (2 bytes) => 32 06 Path: UPS.PowerSummary.PresentStatus.00000000, Type: Input, ReportID: 0x32, Offset: 5, Size: 1, Value: 0.000000 NUT doesn't use this HID object Report[buf]: (2 bytes) => 32 06 Path: UPS.PowerSummary.PresentStatus.00000000, Type: Input, ReportID: 0x32, Offset: 6, Size: 1, Value: 0.000000 NUT doesn't use this HID object Report[buf]: (2 bytes) => 32 06 Path: UPS.PowerSummary.PresentStatus.00000000, Type: Input, ReportID: 0x32, Offset: 7, Size: 1, Value: 0.000000 NUT doesn't use this HID object Report[int]: (2 bytes) => 34 64 Got 1 HID objects... Report[buf]: (2 bytes) => 34 64 Path: UPS.PowerSummary.RemainingCapacity, Type: Input, ReportID: 0x34, Offset: 0, Size: 8, Value: 100.000000 Report[int]: (2 bytes) => 32 06 Got 8 HID objects... Report[buf]: (2 bytes) => 32 06 Path: UPS.PowerSummary.PresentStatus.ShutdownImminent, Type: Input, ReportID: 0x32, Offset: 0, Size: 1, Value: 0.000000 Report[buf]: (2 bytes) => 32 06 Path: UPS.PowerSummary.PresentStatus.TLACPresent, Type: Input, ReportID: 0x32, Offset: 1, Size: 1, Value: 1.000000 Report[buf]: (2 bytes) => 32 06 Path: UPS.PowerSummary.PresentStatus.TLCharging, Type: Input, ReportID: 0x32, Offset: 2, Size: 1, Value: 1.000000 Report[buf]: (2 bytes) => 32 06 Path: UPS.PowerSummary.PresentStatus.TLDischarging, Type: Input, ReportID: 0x32, Offset: 3, Size: 1, Value: 0.000000 Report[buf]: (2 bytes) => 32 06 Path: UPS.PowerSummary.PresentStatus.TLNeedReplacement, Type: Input, ReportID: 0x32, Offset: 4, Size: 1, Value: 0.000000 Report[buf]: (2 bytes) => 32 06 Path: UPS.PowerSummary.PresentStatus.00000000, Type: Input, ReportID: 0x32, Offset: 5, Size: 1, Value: 0.000000 NUT doesn't use this HID object Report[buf]: (2 bytes) => 32 06 Path: UPS.PowerSummary.PresentStatus.00000000, Type: Input, ReportID: 0x32, Offset: 6, Size: 1, Value: 0.000000 NUT doesn't use this HID object Report[buf]: (2 bytes) => 32 06 Path: UPS.PowerSummary.PresentStatus.00000000, Type: Input, ReportID: 0x32, Offset: 7, Size: 1, Value: 0.000000 NUT doesn't use this HID object Report[int]: (2 bytes) => 34 64 Got 1 HID objects... Report[buf]: (2 bytes) => 34 64 Path: UPS.PowerSummary.RemainingCapacity, Type: Input, ReportID: 0x34, Offset: 0, Size: 8, Value: 100.000000 Report[int]: (2 bytes) => 32 06 Got 8 HID objects... Report[buf]: (2 bytes) => 32 06 Path: UPS.PowerSummary.PresentStatus.ShutdownImminent, Type: Input, ReportID: 0x32, Offset: 0, Size: 1, Value: 0.000000 Report[buf]: (2 bytes) => 32 06 Path: UPS.PowerSummary.PresentStatus.TLACPresent, Type: Input, ReportID: 0x32, Offset: 1, Size: 1, Value: 1.000000 Report[buf]: (2 bytes) => 32 06 Path: UPS.PowerSummary.PresentStatus.TLCharging, Type: Input, ReportID: 0x32, Offset: 2, Size: 1, Value: 1.000000 Report[buf]: (2 bytes) => 32 06 Path: UPS.PowerSummary.PresentStatus.TLDischarging, Type: Input, ReportID: 0x32, Offset: 3, Size: 1, Value: 0.000000 Report[buf]: (2 bytes) => 32 06 Path: UPS.PowerSummary.PresentStatus.TLNeedReplacement, Type: Input, ReportID: 0x32, Offset: 4, Size: 1, Value: 0.000000 Report[buf]: (2 bytes) => 32 06 Path: UPS.PowerSummary.PresentStatus.00000000, Type: Input, ReportID: 0x32, Offset: 5, Size: 1, Value: 0.000000 NUT doesn't use this HID object Report[buf]: (2 bytes) => 32 06 Path: UPS.PowerSummary.PresentStatus.00000000, Type: Input, ReportID: 0x32, Offset: 6, Size: 1, Value: 0.000000 NUT doesn't use this HID object Report[buf]: (2 bytes) => 32 06 Path: UPS.PowerSummary.PresentStatus.00000000, Type: Input, ReportID: 0x32, Offset: 7, Size: 1, Value: 0.000000 NUT doesn't use this HID object Report[int]: (2 bytes) => 34 64 Got 1 HID objects... Report[buf]: (2 bytes) => 34 64 Path: UPS.PowerSummary.RemainingCapacity, Type: Input, ReportID: 0x34, Offset: 0, Size: 8, Value: 100.000000 Report[int]: (2 bytes) => 32 06 _______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
