Selon Roman Serbski <[EMAIL PROTECTED]> le Lun 25 fév 06:37:23 2008 :
> Hi list- Hello, > I'm having problems with TrippLite SMX1500LCD not being detected by > NUT under FreeBSD 6.3-RC2. NUT 2.2.1 was installed from ports with the > following options: > > WITH_USB=true > WITH_SNMP=true > WITHOUT_IPV6=true > WITH_LIBUPSCLIENT=true > WITH_CGI=true > > I use USB cable shipped with TrippLite and 'usbdevs -v' shows the following: > > ... > Controller /dev/usb2: > addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), > Intel(0x0000), rev 1.00 > port 1 powered > port 2 addr 2: low speed, power 100 mA, config 1, TRIPP LITE > UPS(0x2005), Tripp Lite(0x09ae), rev 0.10 > ... > > According to http://www.networkupstools.org/compat/stable.html it > looks like SMX1500LCD is supported (by usbhid-ups). > > However, whenever I try to start nut I see the following error: > > No matching HID UPS found > Driver failed to start (exit status=1) It seems that this product is not known. Could you please try to add an entry for it in src/sys/dev/usb/usbdevs ? Best regards, -- Th. Thomas. _______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
