Quoting Arjen de Korte <[EMAIL PROTECTED]>:
>> My problem is that sometimes the UPS is running OK, but when the >> message "UPS is trimming incoming voltage" appears on knutclient (i.e. >> OL TRIM in nut), I have something like >> >> Input Voltage >> 241.1 >> Output Voltage >> 202.0 >> nominal 220.0 ??? >> >> This output voltage is too low! I think power spikes may be better >> than using this voltage. > > I don't think so. Unless the input voltage is exceptionally low (but then > the UPS would switch to battery), the power supply will not be hurt by it. > An input voltage that is too high, will hurt it, so I wouldn't worry about > it. Do you mean the computer's power supply? But it is supposed to run on 220-230V not on 202V! Isn't this a problem? > >> I don't know if the problem is the UPS or from communication with it. >> Can you please help me checking this? I have search on the web and on >> the nut mailing-lists, but I didn't found anything. > > NUT has no way to control is the UPS is using BOOST/TRIM, this is > something that the UPS decides all by itself. So there is nothing we can > do about it, complain to Mustek if you feel this is wrong. I thought that issuing upscmd -u admin -p password mustek reset.input.minmax might make the UPS "re-think" if it should trim the output voltage, but I seems I was wrong. It does nothing. I will certainly complain to Mustek, as they say 220-230V output. > > Best regards, Arjen Thanks again, Pedro. > -- > Eindhoven - The Netherlands > Key fingerprint - 66 4E 03 2C 9D B5 CB 9B 7A FE 7E C1 EE 88 BC 57 > _______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
