Alexander I. Gordeev wrote: <snip>
megatec_usb is definitely the right driver for your UPS. I don't know if anything could be done to stop failures. Can you plug the UPS to another computer and run megatec_usb again?
Hi, I've just run the same binaries on my new test machine, and I get the following output:
Network UPS Tools 2.2.1- - Megatec protocol driver 1.5.9 [megatec_usb] Carlos Rodrigues (c) 2003-2007 Serial-over-USB transport layer for Megatec protocol driver [megatec_usb] Andrey Lelikov (c) 2006, Alexander Gordeev (c) 2006-2007, Jon Gough (c) 2007 debug level is '4' Checking device (0000/0000) (002/001) - VendorID: 0000 - ProductID: 0000 - Manufacturer: unknown - Product: unknown - Serial Number: unknown - Bus: 002 Trying to match device Device does not match - skipping Checking device (0001/0000) (001/005) - VendorID: 0001 - ProductID: 0000 - Manufacturer: unknown - Product: unknown - Serial Number: unknown - Bus: 001 Trying to match device Device matches get_data_krauler: no command set Starting UPS detection process... Asking for UPS status [Q1]... get_data_krauler: index [03], prefix [(] Q1 => OK [(229.0 165.0 229.0 000 50.0 13.0 00.0 00001010] Asking for UPS status [Q1]... get_data_krauler: index [03], prefix [(] Q1 => OK [(231.0 165.0 231.0 000 50.0 13.0 00.0 00001010] Asking for UPS status [Q1]... get_data_krauler: index [03], prefix [(] Q1 => OK [(229.0 165.0 229.0 000 50.0 13.0 00.0 00001010] Asking for UPS status [Q1]... get_data_krauler: index [03], prefix [(] Q1 => OK [(229.0 165.0 229.0 000 49.8 13.0 00.0 00001010] Asking for UPS status [Q1]... get_data_krauler: index [03], prefix [(] Q1 => OK [(231.0 165.0 231.0 000 50.0 13.0 00.0 00001010] 0 out of 5 detection attempts failed (minimum failures: 2). Asking for UPS information [I]... get_data_krauler: index [0c], prefix [#] I => OK [# UPS500V VER3.10C ] Megatec protocol UPS detected [ UPS500V VER3.10C]. Asking for UPS power ratings [F]... get_data_krauler: index [0d], prefix [#] F => OK [#230.0 003 11.50 50.0] Unsupported battery voltage (11.5V). This UPS has an unsupported combination of battery voltage/number of batteries. Cannot calculate charge percentage for this UPS. Done setting up the UPS. Asking for UPS status [Q1]... get_data_krauler: index [03], prefix [(] Q1 => OK [(234.0 165.0 234.0 000 50.0 13.0 00.0 00001010] dstate_init: sock /var/run/nut/megatec_usb-plexus open on fd 5 Asking for UPS status [Q1]... get_data_krauler: index [03], prefix [(] Q1 => OK [(229.0 165.0 229.0 000 50.2 13.0 00.0 00001010] Asking for UPS status [Q1]... get_data_krauler: index [03], prefix [(] Q1 => OK [(229.0 165.0 229.0 000 50.2 13.0 00.0 00001010] Asking for UPS status [Q1]... get_data_krauler: index [03], prefix [(] Q1 => OK [(229.0 165.0 229.0 000 50.2 13.0 00.0 00001010] Asking for UPS status [Q1]... get_data_krauler: index [03], prefix [(] get_data_krauler: retry [UPS No Ack] get_data_krauler: retry [UPS No Ack] Q1 => OK [(231.0 165.0 231.0 000 50.2 13.0 00.0 00001010] Asking for UPS status [Q1]... get_data_krauler: index [03], prefix [(] Q1 => OK [(229.0 165.0 229.0 000 50.0 13.0 00.0 00001010] Asking for UPS status [Q1]... get_data_krauler: index [03], prefix [(] Q1 => OK [(229.0 165.0 229.0 000 50.2 13.0 00.0 00001010] Asking for UPS status [Q1]... get_data_krauler: index [03], prefix [(] Q1 => OK [(234.0 165.0 234.0 000 50.0 13.0 00.0 00001010] Asking for UPS status [Q1]... get_data_krauler: index [03], prefix [(] Q1 => OK [(234.0 165.0 234.0 000 50.0 13.0 00.0 00001010] Asking for UPS status [Q1]... get_data_krauler: index [03], prefix [(] Q1 => OK [(229.0 165.0 229.0 000 50.2 13.0 00.0 00001010]
Helpfully, less failures there.
Also please try version 2.2.2-pre3 released today: http://www.networkupstools.org/source.html
My next port of call.
As Carlos wrote recently there is no way to calculate charge percentage if I and F commands fail. http://lists.alioth.debian.org/pipermail/nut-upsuser/2008-April/003970.html
Ok, they don't fail on my test machine, so I'll ignore that problem for now...one thing at a time ;) - Jamie
signature.asc
Description: OpenPGP digital signature
_______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
