Alexander I. Gordeev wrote: <snip>
Also please try version 2.2.2-pre3 released today: http://www.networkupstools.org/source.html
Done:
tester:/usr/local/ups# ./bin/megatec_usb -DDDD -u root -a plexus Network UPS Tools 2.2.2-pre3 - Megatec protocol driver 1.5.13 [megatec_usb] Carlos Rodrigues (c) 2003-2008 Serial-over-USB transport layer for Megatec protocol driver [megatec_usb] Andrey Lelikov (c) 2006, Alexander Gordeev (c) 2006-2007, Jon Gough (c) 2007 debug level is '4' Checking device (0000/0000) (002/001) - VendorID: 0000 - ProductID: 0000 - Manufacturer: Linux 2.6.24-1-686 uhci_hcd - Product: UHCI Host Controller - Serial Number: 0000:00:07.3 - Bus: 002 Trying to match device Device does not match - skipping Checking device (0001/0000) (001/007) - VendorID: 0001 - ProductID: 0000 - Manufacturer: unknown - Product: unknown - Serial Number: unknown - Bus: 001 Trying to match device Device matches Starting UPS detection process... Asking for UPS status [Q1]... set_data_krauler: index [03] Q1 => OK [(237.0 165.0 237.0 000 50.0 13.0 00.0 00001010] Asking for UPS status [Q1]... set_data_krauler: index [03] Q1 => OK [(234.0 165.0 234.0 000 50.0 13.0 00.0 00001010] Asking for UPS status [Q1]... set_data_krauler: index [03] Q1 => OK [(231.0 165.0 231.0 000 50.2 13.0 00.0 00001010] Asking for UPS status [Q1]... set_data_krauler: index [03] Q1 => OK [(234.0 165.0 234.0 000 50.0 13.0 00.0 00001010] Asking for UPS status [Q1]... set_data_krauler: index [03] Q1 => OK [(234.0 165.0 234.0 000 50.0 13.0 00.0 00001010] 0 out of 5 detection attempts failed (minimum failures: 2). Cancelling any pending shutdown or battery test. set_data_krauler: index [0b] set_data_krauler: retry [UPS No Ack] Asking for UPS information [I]... set_data_krauler: index [0c] set_data_krauler: retry [UPS No Ack] I => OK [# UPS500V VER3.10C ] Megatec protocol UPS detected [ UPS500V VER3.10C]. Parameter [ignoreoff]: [false] Asking for UPS power ratings [F]... set_data_krauler: index [0d] F => OK [#230.0 003 11.50 50.0] Unsupported battery voltage (11.5V). This UPS has an unsupported combination of battery voltage/number of batteries. Cannot calculate charge percentage for this UPS. Done setting up the UPS. Asking for UPS status [Q1]... set_data_krauler: index [03] Q1 => OK [(231.0 165.0 231.0 000 50.0 13.0 00.0 00001010] dstate_init: sock /var/state/ups/megatec_usb-plexus open on fd 5 Asking for UPS status [Q1]... set_data_krauler: index [03] Q1 => OK [(231.0 165.0 231.0 000 50.2 13.0 00.0 00001010] Asking for UPS status [Q1]... set_data_krauler: index [03] Q1 => OK [(234.0 165.0 234.0 000 50.0 13.0 00.0 00001010] Asking for UPS status [Q1]... set_data_krauler: index [03] Q1 => OK [(231.0 165.0 231.0 000 50.0 13.0 00.0 00001010] Asking for UPS status [Q1]... set_data_krauler: index [03] Q1 => OK [(231.0 165.0 231.0 000 50.0 13.0 00.0 00001010] Asking for UPS status [Q1]... set_data_krauler: index [03] Q1 => OK [(234.0 165.0 234.0 000 50.2 13.0 00.0 00001010] Asking for UPS status [Q1]... set_data_krauler: index [03] Q1 => OK [(231.0 165.0 231.0 000 50.0 13.0 00.0 00001010] Asking for UPS status [Q1]... set_data_krauler: index [03] Q1 => OK [(231.0 165.0 231.0 000 50.0 13.0 00.0 00001010] Asking for UPS status [Q1]... set_data_krauler: index [03] Q1 => OK [(234.0 165.0 234.0 000 50.0 13.0 00.0 00001010] Asking for UPS status [Q1]... set_data_krauler: index [03] Q1 => OK [(229.0 165.0 229.0 000 50.0 13.0 00.0 00001010] Signal 2: exiting
<snip> Just let me know if/when you need any more from me. - Jamie
signature.asc
Description: OpenPGP digital signature
_______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
