I have bought 1 UPS in Turkey and the upsilon program came with it. Its running with upsilon if i choice megatec driver.
Yesterday i have installed Nut. When i run it i am having some problems with it. I am using nut-2.2.2-1 on Fedora 9.
[EMAIL PROTECTED] ups]# megatec -a tuncmatik
Network UPS Tools 2.2.2 - Megatec protocol driver 1.5.14 [megatec]
Carlos Rodrigues (c) 2003-2008
Megatec protocol UPS detected.
Cannot calculate charge percentage for this UPS.
[EMAIL PROTECTED] ups]#
[EMAIL PROTECTED] ups]# upsc [EMAIL PROTECTED]
battery.voltage: 2.22
driver.name: megatec
driver.parameter.mfr: Tuncmatik
driver.parameter.pollinterval: 2
driver.parameter.port: /dev/ttyS1
driver.version: 2.2.2
driver.version.internal: 1.5.14
input.frequency: 49.9
input.voltage: 213.3
input.voltage.fault: 213.3
input.voltage.maximum: 213.3
input.voltage.minimum: 213.3
output.voltage: 220.1
ups.beeper.status: disabled
ups.delay.shutdown: 0
ups.delay.start: 2
ups.load: 27.0
ups.mfr: Tuncmatik
ups.model: unknown
ups.serial: unknown
ups.status: OL
ups.temperature: 38.0
ups.type: online
What is problem with my UPS i can not see Battery charge level ?
--
Best regards,
_______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
