Hi Jayson, I forward your request to the right place. Carlos (or some other) will have an answer, or at least some questions for you.
-- Arnaud 2008/6/27 Jayson Anderson <[EMAIL PROTECTED]>: > Greetings Arnaud, > > I wrote you some time ago about whether NUT would support the Belkin > F6H550-UPS device in the future. > > You had replied and mentioned to send you info if I had any success; I did > dig in further with version 2.2.2 (i was using 2.2.1 when I wrote the > initial email in mid-March 2008) > > I managed to get the device sort-of working, but i'm getting the > "unsupported combination of battery voltage..." error when attempting to > bring upsdrvctl online. > > I am sending you some output to see if it will be of any help to you. I am > not certain of the configuration of the UPS battery quantity/voltage. If you > wish, I can take it apart to try and glean some more info. The > package/instructions do not contain and solid data on this matter. > > Here is some output; if you need anymore or have any suggestions to bring > the batteries into spec with NUT, let me know. > > Thanks graciously for your time. > > Kind Regards, > Jayson > > PS: check out the voltage reading on "present voltage". strange! > > ------stuff------- > > [EMAIL PROTECTED] bin]# /usr/local/ups/bin/megatec_usb -DDD -a ups1 > Network UPS Tools 2.2.2 - Megatec protocol driver 1.5.14 [megatec_usb] > Carlos Rodrigues (c) 2003-2008 > > Serial-over-USB transport layer for Megatec protocol driver [megatec_usb] > Andrey Lelikov (c) 2006, Alexander Gordeev (c) 2006-2007, Jon Gough (c) 2007 > > debug level is '3' > Checking device (0000/0000) (005/001) > - VendorID: 0000 > - ProductID: 0000 > - Manufacturer: unknown > - Product: unknown > - Serial Number: unknown > - Bus: 005 > Trying to match device > Device does not match - skipping > Checking device (0000/0000) (004/001) > - VendorID: 0000 > - ProductID: 0000 > - Manufacturer: unknown > - Product: unknown > - Serial Number: unknown > - Bus: 004 > Trying to match device > Device does not match - skipping > Checking device (0665/5161) (003/004) > - VendorID: 0665 > - ProductID: 5161 > - Manufacturer: Cypress Semiconductor > - Product: USB to Serial > - Serial Number: unknown > - Bus: 003 > Trying to match device > Device matches > Starting UPS detection process... > Asking for UPS status [Q1]... > Q1 => OK [(119.8 119.8 121.6 NNN 60.2 13.6 N/.A 00001001] > Asking for UPS status [Q1]... > Q1 => OK [(119.9 119.9 121.6 NNN 60.2 13.6 N/.A 00001001] > Asking for UPS status [Q1]... > Q1 => OK [(119.8 119.8 121.6 NNN 60.2 13.6 N/.A 00001001] > Asking for UPS status [Q1]... > Q1 => OK [(119.8 119.8 121.0 NNN 60.1 13.6 N/.A 00001001] > Asking for UPS status [Q1]... > Q1 => OK [(119.8 119.8 121.0 NNN 60.2 13.6 N/.A 00001001] > 0 out of 5 detection attempts failed (minimum failures: 2). > Cancelling any pending shutdown or battery test. > Asking for UPS information [I]... > I => FAILED [short read] > I detail: (0 bytes) => > Megatec protocol UPS detected. > Parameter [ignoreoff]: [false] > Asking for UPS power ratings [F]... > F => OK [#120.0 005 12.00 60.0] > 12.0V battery, present voltage (8549026304.0V) outside of supported > intervals. > This UPS has an unsupported combination of battery voltage/number of > batteries. > Cannot calculate charge percentage for this UPS. > Done setting up the UPS. > Asking for UPS status [Q1]... > Q1 => OK [(119.8 119.8 121.2 NNN 60.2 13.6 N/.A 00001001] > dstate_init: sock /var/state/ups/megatec_usb-ups1 open on fd 5 > Asking for UPS status [Q1]... > Q1 => OK [(119.8 119.8 121.5 NNN 60.2 13.6 N/.A 00001001] > Asking for UPS status [Q1]... > Q1 => OK [(119.8 119.8 121.6 NNN 60.1 13.6 N/.A 00001001] > Asking for UPS status [Q1]... > Q1 => OK [(119.8 119.8 121.5 NNN 60.1 13.6 N/.A 00001001] > Asking for UPS status [Q1]... > Q1 => OK [(119.8 119.8 121.5 NNN 60.1 13.6 N/.A 00001001] > Asking for UPS status [Q1]... > Q1 => OK [(119.8 119.8 121.4 NNN 60.1 13.6 N/.A 00001001] > Asking for UPS status [Q1]... > Q1 => OK [(119.8 119.8 121.4 NNN 60.1 13.6 N/.A 00001001] > Asking for UPS status [Q1]... > Q1 => OK [(119.8 119.8 121.4 NNN 60.1 13.6 N/.A 00001001] > Asking for UPS status [Q1]... > Q1 => OK [(119.8 119.8 121.4 NNN 60.1 13.6 N/.A 00001001] > Asking for UPS status [Q1]... > Q1 => OK [(119.8 119.8 121.5 NNN 60.1 13.6 N/.A 00001001] > Asking for UPS status [Q1]... > Q1 => OK [(119.8 119.8 121.6 NNN 60.1 13.6 N/.A 00001001] > Asking for UPS status [Q1]... > Q1 => OK [(119.8 119.8 121.6 NNN 60.2 13.6 N/.A 00001001] > Asking for UPS status [Q1]... > Q1 => OK [(119.8 119.8 121.6 NNN 60.2 13.6 N/.A 00001001] > Asking for UPS status [Q1]... > Q1 => OK [(119.8 119.8 121.6 NNN 60.2 13.6 N/.A 00001001] > Asking for UPS status [Q1]... > Q1 => OK [(119.8 119.8 121.4 NNN 60.1 13.6 N/.A 00001001] > Asking for UPS status [Q1]... > Q1 => OK [(119.8 119.8 120.9 NNN 60.1 13.6 N/.A 00001001] > Asking for UPS status [Q1]... > Q1 => OK [(119.8 119.8 120.7 NNN 60.1 13.6 N/.A 00001001] > Asking for UPS status [Q1]... > Q1 => OK [(119.8 119.8 120.6 NNN 60.1 13.6 N/.A 00001001] > Asking for UPS status [Q1]... > Q1 => OK [(119.8 119.8 120.6 NNN 60.1 13.6 N/.A 00001001] > Asking for UPS status [Q1]... > Q1 => OK [(119.8 119.8 120.6 NNN 60.1 13.6 N/.A 00001001] > Asking for UPS status [Q1]... > Q1 => OK [(119.8 119.8 120.6 NNN 60.1 13.6 N/.A 00001001] > Asking for UPS status [Q1]... > Q1 => OK [(119.8 119.8 120.6 NNN 60.1 13.6 N/.A 00001001] > Asking for UPS status [Q1]... > Q1 => OK [(119.8 119.8 120.6 NNN 60.1 13.6 N/.A 00001001] > Asking for UPS status [Q1]... > Q1 => OK [(119.8 119.8 120.6 NNN 60.1 13.6 N/.A 00001001] > Asking for UPS status [Q1]... > Q1 => OK [(119.8 119.8 120.6 NNN 60.1 13.6 N/.A 00001001] > Asking for UPS status [Q1]... > Q1 => OK [(119.8 119.8 120.6 NNN 60.1 13.6 N/.A 00001001] > Asking for UPS status [Q1]... > Q1 => OK [(119.8 119.8 120.6 NNN 60.1 13.6 N/.A 00001001] > Asking for UPS status [Q1]... > Q1 => OK [(119.8 119.8 120.6 NNN 60.1 13.6 N/.A 00001001] > Asking for UPS status [Q1]... > Q1 => OK [(119.8 119.8 120.6 NNN 60.1 13.6 N/.A 00001001] > Asking for UPS status [Q1]... > Q1 => OK [(119.8 119.8 120.6 NNN 60.1 13.6 N/.A 00001001] > Asking for UPS status [Q1]... > Q1 => OK [(119.8 119.8 120.6 NNN 60.1 13.6 N/.A 00001001] > Asking for UPS status [Q1]... > Q1 => OK [(119.8 119.8 120.6 NNN 60.1 13.6 N/.A 00001001] > Asking for UPS status [Q1]... > Q1 => OK [(119.8 119.8 120.6 NNN 60.1 13.6 N/.A 00001001] > Asking for UPS status [Q1]... > Q1 => OK [(119.8 119.8 120.6 NNN 60.1 13.6 N/.A 00001001] > Asking for UPS status [Q1]... > Q1 => OK [(119.8 119.8 121.4 NNN 60.1 13.6 N/.A 00001001] > Asking for UPS status [Q1]... > Q1 => OK [(119.8 119.8 121.6 NNN 60.1 13.6 N/.A 00001001] > Asking for UPS status [Q1]... > Q1 => OK [(119.8 119.8 121.6 NNN 60.1 13.6 N/.A 00001001] > Asking for UPS status [Q1]... > Q1 => OK [(119.8 119.8 121.6 NNN 60.1 13.6 N/.A 00001001] > Asking for UPS status [Q1]... > Q1 => OK [(119.8 119.8 121.6 NNN 60.1 13.6 N/.A 00001001] > Asking for UPS status [Q1]... > Q1 => OK [(119.8 119.8 121.6 NNN 60.1 13.6 N/.A 00001001] > Asking for UPS status [Q1]... > Q1 => OK [(119.8 119.8 121.6 NNN 60.1 13.6 N/.A 00001001] > Asking for UPS status [Q1]... > Q1 => OK [(119.8 119.8 121.6 NNN 60.1 13.6 N/.A 00001001] > Asking for UPS status [Q1]... > Q1 => OK [(119.8 119.8 121.6 NNN 60.1 13.6 N/.A 00001001] > > [EMAIL PROTECTED] etc]# /usr/local/ups/bin/upsc [EMAIL PROTECTED] > battery.voltage: 0.00 > battery.voltage.nominal: 12.0 > driver.name: megatec_usb > driver.parameter.pollinterval: 2 > driver.parameter.port: /dev/usbdev3.4 > driver.version: 2.2.2 > driver.version.internal: 1.5.14 > input.frequency: 0.0 > input.frequency.nominal: 60.0 > input.voltage: 119.8 > input.voltage.fault: 119.8 > input.voltage.maximum: 119.8 > input.voltage.minimum: 119.8 > input.voltage.nominal: 120.0 > output.voltage: 120.8 > ups.beeper.status: disabled > ups.delay.shutdown: 0 > ups.delay.start: 2 > ups.load: 0.0 > ups.mfr: unknown > ups.model: unknown > ups.serial: unknown > ups.status: OL > ups.type: online > > _______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
