On Sat, Nov 22, 2008 at 9:37 PM, Barb Smith <[EMAIL PROTECTED]> wrote: > > > On Sun, 23 Nov 2008 00:49:32 -0000, Charles Lepple <[EMAIL PROTECTED]> > wrote: > >> On Sat, Nov 22, 2008 at 12:14 PM, Barb Smith <[EMAIL PROTECTED]> >> wrote: >> >>> Bus 002 Device 003: ID 09ae:1007 Tripp Lite >> >> Aha, this says that Tripp Lite changed the USB ID of this device. >> >> The tripplite_usb driver only knows about product ID 0001, and 1007 >> isn't one of the known IDs in usbhid-ups (as of v2.2.2). >> >> In our development version, there is an entry for 09ae:1007, but it >> says "AVR750U". >> >> To try and see if this might work, please change the ups.conf entry >> back to "driver = usbhid-ups", and add the line "productid = 1007". >> >> Then, start the driver as follows: >> >> /lib/nut/usbhid-ups -u root -a omni100 -D >> >> Let it run for a few minutes, then kill it with Ctrl-C. >> >> Please capture the log messages, and gzip them before sending to the list. >> > > I couldn't really find anything in dmesg or syslog so I put the output into > a log file and I'm attaching it.
The critical flag here is "-D" (capital D), to enable debug output to the console (so nothing extra should go to syslog). I mentioned gzip since the output tends to be verbose. Here's the first few lines on an older APC setup: # /lib/nut/usbhid-ups -a apc -D Network UPS Tools: 0.29 USB communication driver - core 0.32 (2.2.1-) debug level is '1' upsdrv_initups... Using subdriver: APC HID 0.92 Path: UPS.PowerSummary.iProduct, Type: Feature, ReportID: 0x01, Offset: 0, Size: 8, Value: 1.000000 Path: UPS.PowerSummary.iSerialNumber, Type: Feature, ReportID: 0x02, Offset: 0, Size: 8, Value: 2.000000 ... -- - Charles Lepple _______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
