Bonsoir Arnaud ;-), > hey, Lenny is out. come on! ;-p
I would like to stay on Etch :-p. > typo error? > => *C*MDSCRIPT It was just a mistake during copy/paste, no problem. > > you have perhaps missed that one (not mentioned nor the way you > started the components!): > == /etc/default/nut == > START_UPSD=yes > START_UPSMON=yes > No problem too. > have a look at /usr/share/doc/nut/README.Debian for more info. > also note that I've completely changed this (ie removed this file) > from the latest release in Sid (and Jaunty) 2.4.1-2: it has been > replaced by the new nut.conf file, shipped with NUT (as of 2.4.0) > > otherwise, check your device (ie if lsusb give Bus:Dev 001:001, then > "ls -l /dev/bus/usb/001/001). > it should be root:nut Confirmed. > > starting the driver in debug mode might help too: /lib/nut/usbhid- > ups -DDD -a MGE850VA I realized that I *don't* have the driver in /lib/nut, actually not in my system at all ! What's going on !? I installed the package nut and nut-usb. Cheers, Vianney _______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
