Citeren Gabriel Hahmann <[email protected]>: [...]
> My device is connected in the bus 001, device 004, and when i do a lsusb -s > 001:004 -vvv the result is as follows: > > Bus 001 Device 004: ID 04b4:5500 Cypress Semiconductor Corp. HID->COM RS232 > Adapter > Device Descriptor: > bLength 18 > bDescriptorType 1 > bcdUSB 1.00 > bDeviceClass 0 (Defined at Interface level) > bDeviceSubClass 0 > bDeviceProtocol 0 > bMaxPacketSize0 8 > idVendor 0x04b4 Cypress Semiconductor Corp. > idProduct 0x5500 HID->COM RS232 Adapter > bcdDevice 0.00 > iManufacturer 1 Cypress Semiconductor > iProduct 2 USB to Serial > iSerial 0 > bNumConfigurations 1 > Configuration Descriptor: > bLength 9 > bDescriptorType 2 > wTotalLength 41 > bNumInterfaces 1 > bConfigurationValue 1 > iConfiguration 4 Sample HID > bmAttributes 0x80 > (Bus Powered) > MaxPower 100mA > Interface Descriptor: > bLength 9 > bDescriptorType 4 > bInterfaceNumber 0 > bAlternateSetting 0 > bNumEndpoints 2 > bInterfaceClass 3 Human Interface Device > bInterfaceSubClass 0 No Subclass > bInterfaceProtocol 0 None > iInterface 0 > HID Device Descriptor: > bLength 9 > bDescriptorType 33 > bcdHID 1.00 > bCountryCode 0 Not supported > bNumDescriptors 1 > bDescriptorType 34 Report > wDescriptorLength 37 > Report Descriptors: > ** UNAVAILABLE ** > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x81 EP 1 IN > bmAttributes 3 > Transfer Type Interrupt > Synch Type None > Usage Type Data > wMaxPacketSize 0x0008 1x 8 bytes > bInterval 1 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x02 EP 2 OUT > bmAttributes 3 > Transfer Type Interrupt > Synch Type None > Usage Type Data > wMaxPacketSize 0x0008 1x 8 bytes > bInterval 1 > Device Status: 0x0000 > (Bus Powered) > > Anybody knows how to handle this? This device should be recognized by the kernel as a generic USB to serial converter. Usually this means that it will create a /dev/ttyUSBx port for you when you connect it. You can use the megatec driver to connect to this port. Best regards, Arjen PS Don't cross-post to the development mailing list if you don't get an answer immediately. This list is mostly run by volunteers, so give us a little time to answer. -- Please keep list traffic on the list _______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
