Citeren Arnaud Quette <[email protected]>: >> upsd.conf >> ######### >> ACL all 0.0.0.0/0 >> ACL localhost 127.0.0.1/32 >> ACL localhost2 127.0.1.1/32 >> ACL nobodynet 10.9.2.0/24 >> #ACCEPT <http://10.9.2.0/24%0A#ACCEPT> all >> ACCEPT localhost >> ACCEPT nobodynet >> ACCEPT localhost2 >> REJECT all >> > > try putting all ACCEPT on the same line, ie: > ACCEPT localhost nobodynet localhost2 > > and restart nut.
That might help if NUT would use the ACCEPT mechanism in the allowfrom processing (which is not the case). To help people out that find this thread through a search tool, I'll explain it once more. In NUT versions earlier than 2.4.0 (where we dropped the ACL mechanism), ACCEPT/REJECT (in upsd.conf) will determine if a connection is allowed in the first place. In order to set master privileges on a UPS, you first need a connection (so there must be a matching ACCEPT before a possible REJECT) but after that you only need to match the 'allowfrom' (in upsd.users) for the user that made the connection. The allowfrom processing only uses the ACL line from upsd.conf, not ACCEPT/REJECT lines. Best regards, Arjen -- Please keep list traffic on the list _______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
