Hello, I own some Ablerex MARS 3000 (MS3000RT) UPS. Following the thread here : http://osdir.com/ml/monitoring.nut.user/2006-04/msg00091.html I would have the following issues : 1. The battery charge displayed seems wrong : It always shows 100.0 - even when the battery is disconnected for replacement. 2. Battery voltage 2.29 is also static ...and wrong. The initial assumption of being the voltage per unit seems wrong : the ups uses 8 x 12V batteries. 8*12 = 96V , same as battery.voltage.nominal: which is correct. The initial poster seems to have more credible results at least regarding the battery.charge: variable, however in my case the value is wrong.
System params : #upsc Ablerex2 battery.charge: 100.0 battery.voltage: 2.29 battery.voltage.nominal: 96.0 driver.name: megatec driver.parameter.pollinterval: 2 driver.parameter.port: /dev/ttyUSB0 driver.version: 2.2.0- driver.version.internal: 1.5.4 input.frequency: 50.0 input.voltage: 227.1 input.voltage.fault: 190.0 input.voltage.maximum: 230.6 input.voltage.minimum: 216.5 output.voltage: 221.3 output.voltage.nominal: 220.0 ups.beeper.status: disabled ups.delay.shutdown: 0 ups.delay.start: 2 ups.load: 95.0 ups.mfr: Ablerex ups.model: MS3000RT MS02035C ups.serial: unknown ups.status: OL ups.temperature: 55.8 Any ideea about the cause of the anomalies ? Thank you in advance.
_______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
