Citeren Bob Blackwell <[email protected]>: [...]
> The systems message.log contains several lines with; > > Mar 13 19:16:20 DNS323_NAS user.warn kernel: usb 1-1.2: usbfs: process > 26398 (usbhid-ups) did not claim interface 0 before use This usually means that more than one driver is active for the same USB device and/or hotplug/udev isn´t setup properly. It could occasionally happen if the connection is lost as well. > Issuing a usbhid-ups -DD -a APC_UPS reveals; [...] This debug level is too low to provide enough input. For this problem, you'll need to run it with debug level 5 before it will show what is going on. Please note the following from 'man 8 nutupsdrv': "The level of debugging needed depends both on the driver and the problem you're trying to diagnose. Therefore, first explain the problem you have with a driver to a developer/maintainer, before sending them debugging output. More often than not, if you just pick a level, the output may be either too limited or too verbose to be of any use." Best regards, Arjen -- Please keep list traffic on the list _______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
