Hi, I get a trouble using nut with PowerMan Back Pro N 1400 Plus
~# /lib/nut/megatec -DDDDD -a pman Network UPS Tools - Megatec protocol driver 1.6 (2.4.1) send_to_all: SETINFO driver.parameter.port "/dev/ttyS0" debug level is '5' DTR=1, RTS=0 Starting UPS detection process... Asking for UPS information [I]... I => OK [# PCSTAR-PRO V1.02-2411] I VALUES => [ PCSTAR-PRO V1.02-2411] Asking for UPS status [Q1]... Q1 => FAILED [timeout] Asking for UPS status [Q1]... Q1 => FAILED [short read] Q1 detail: (3 bytes) => fc 51 31 Asking for UPS status [Q1]... Q1 => OK [(238.0 238.0 238.0 020 51.0 27.3 47.0 00001001] Q1 VALUES => [238.0 238.0 238.0 20.0 51.0 27.3 47.0 00001001] Asking for UPS status [Q1]... Q1 => FAILED [timeout] Asking for UPS status [Q1]... Q1 => FAILED [short read] Q1 detail: (4 bytes) => ff 8f 51 31 4 out of 5 detection attempts failed (minimum failures: 2). The UPS is supported, but the connection is too unreliable. Try checking the cable for defects. I have tried it on win xp with WinStar Pro and it works just fine. The cable and UPS are new. Any advice? _______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
