I'm running a freebsd 6.2 system and built the nut port.
I cannot seem to connect to serial com1 or 2
/usr/local/etc/nut> upsc apcbk...@localhost
Error: Connection failure: Connection refused
My configs:
ups.conf
-----------------------
[apcBK500]
driver = genericups
upstype=20
port = /dev/cuad1
upsmon.conf
--------------------------
MONITOR apcbk...@localhost 1 upsmon nomspu slave
upsc.conf
-------------------------
ACL all 0.0.0.0/0
ACL localhost 127.0.0.1/32
ACCEPT localhost
REJECT all
Driver results:
-------------------------
/usr/local/etc/nut> /usr/local/libexec/nut/upsdrvctl start
Network UPS Tools - UPS driver controller 2.4.1
Network UPS Tools - Generic contact-closure UPS driver 1.35 (2.4.1)
UPS type: Powerware 5119 RM
Out of desperation. upsd.users
------------------------------------
[admin]
password = password
actions = SET
instcmds = ALL
[upsmon]
password = password
upsmon slave
MONITOR apcbk...@localhost 1 upsmon nomspu slave
I'm connected via a db9 serial because this Backups BK 500 does not have a
usb port.
I've tried just about everything I can think of to manually connect. I've
scanned the previous posts for weeks now and sadly I must ask the list. How
do I get nut working with this apc backups BK 500?
_______________________________________________
Nut-upsuser mailing list
[email protected]
http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
