2009/5/4 Konstantin 'Kastus' Shchuka <[email protected]> > Hi Arnaud, >
Hi Kastus, As you are patching apcsmart.h, can you also apply my patch that I sent > back in November last year for 2.2.1 for the old SU600 model to the upsdev > list? > > I am attaching my original post. > thanks for the reminder. it seems that I've been reseted at some point in time... I've just applied your patch to the trunk. thanks for your contrib. Arnaud -- Linux / Unix Expert R&D - Eaton - http://www.eaton.com/mgeops Network UPS Tools (NUT) Project Leader - http://www.networkupstools.org/ Debian Developer - http://www.debian.org Free Software Developer - http://arnaud.quette.free.fr/ On Mon, May 04, 2009 at 10:32:23AM +0200, Arnaud Quette wrote: > > 2009/5/3 Thomas Juerges > > > > > -----BEGIN PGP SIGNED MESSAGE----- > > > Hash: SHA1 > > > > > > Hi Arnaud, > > > > > > > Hi Thomas, > > > > > > > I just checked the 2.4.1 version of nut and found that you forgot to > add > > > my old UPS model (APC Smart-UPS 900). I guess it is because you were > > > busy at the time when I sent you the patch. So here it goes again. :) > > > > > > > uh, right sorry. > > I was pretty sure I applied it, but seems not. > > it's now done and commited to the Development tree. > > > > I've left your below information about older SmartUPS and Mac os tweaks > > since I'm sure people will be interested in... > > > > thanks a lot for your contrib and reminder ;-) > > > > cheers, > > Arnaud > > -- > > Linux / Unix Expert R&D - Eaton - http://www.eaton.com/mgeops > > Network UPS Tools (NUT) Project Leader - http://www.networkupstools.org/ > > Debian Developer - http://www.debian.org > > Free Software Developer - http://arnaud.quette.free.fr/ > > > > Arnaud Quette wrote: > > > > Hi Thomas, > > > > > > > > just to ack your mails. I'm currently on trip, at the FossCamp / > > > > Ubuntu Developer Summit. > > > > I'll really reply to you soon. > > > > > > > > thanks for your contrib and feedback.and see you soon. > > > > -- Arnaud > > > > > > > > 2008/12/6 Thomas Juerges <[email protected]>: > > > > Hi Arnaud, > > > > > > > > I am not sure if the message which I sent to you via your free.fr > > > > account could reach you. Therefore i have attached it here and send > > > > this one to both email addresses. In the case that you receive both, > > > > please accept my apologies. > > > > > > > > Anyway, I have two patches for you which make the APC SmartUPS-900 > work > > > > (did already before) and report all of its status information (did > not > > > > do that before). I have attached two patches for inclusion into the > > > > next release for your convenience. > > > > > > > > The mentioned patches are as well a reply for the question asked on > the > > > > NUT mailing list when somebody asked why an older SmartUPS would not > > > > provide the same information as under apcupsd. Simple reason is that > > > > the older SmartUPSes (at least mine, SmartUPS-900 w. 7TD firmware) do > > > > not respond to the ^Z, a or b commands which are used to inquire what > > > > they support. > > > > > > > > > > > > I hope you'll find this useful. Cheers, > > > > Thomas Juerges > > > > > > > > > > > > -------- Original Message -------- > > > > Subject: Restarting Power Macs after power loss > > > > Date: Fri, 05 Dec 2008 08:48:02 -0700 > > > > From: Thomas Juerges <[email protected]> > > > > To: [email protected] > > > > > > > > Hi Arnaud, > > > > > > > > first thanks for yor nice piece of software. I am using it on my Mac > > > > Mini G4 since I installed Gentoo on it and I am quite happy with it > > > > [https://www.sokrates.homelinux.net/nut/]. There are a few quirks > but, > > > > well, that's life. No free lunch. :) > > > > > > > > All right. Now for the more important things: I write to you in > > > > response to your comment in this question in the NUT FAQ: > > > > > > > > Q: My PowerMac G4 won't power back up by itself (into Linux) after > the > > > > UPS shuts down. What can I do about this? > > > > > > > > [...] > > > > Unfortunately, the hardware has evolved and there is no good > > > > equivalent for this hack on today's systems. > > > > [...] > > > > > > > > Here is what you have to do nowadays on Linux (Kernel 2.6.x). > > > > Unfortunately this setting is not stored in NVRAM so you'll better > have > > > > it somewhere in rc.local or any other script that gets run every time > > > > during a boot up. > > > > > > > > echo "server_mode=1" > /proc/pmu/options > > > > > > > > This will let the PowerMac restart every time after the power was > lost - > > > > as far as I can tell. I've got only one. :) > > > > > > > > Cheers, > > > > Thomas > > > >> > > > - --- nut-2.2.2/drivers/apcsmart.c 2007-12-12 13:34:51.000000000 > > > -0700 > > > +++ nut-2.2.2-r1/drivers/apcsmart.c 2008-12-06 03:24:36.000000000 > -0700 > > > @@ -536,6 +536,7 @@ > > > /* found one, force the model information */ > > > if (!strcmp(buf, "6QD") || /* (APC600.) */ > > > !strcmp(buf, "8QD") || /* (SmartUPS 1250, > > > vintage 07/94.) */ > > > + !strcmp(buf, "7TD") || /* (SmartUPS > 900, > > > vintage 11/94.) */ > > > !strcmp(buf, "6TI") || /* (APC600.) */ > > > !strcmp(buf, "6QI")) { /* (APC600.) */ > > > upsdebugx(1, "Found Smart-UPS"); > > > >> > > > - --- nut-2.2.2/drivers/apcsmart.h 2007-12-12 13:34:51.000000000 > > > -0700 > > > +++ nut-2.2.2-r1/drivers/apcsmart.h 2008-12-06 03:00:48.000000000 > -0700 > > > @@ -261,6 +261,8 @@ > > > { "D6", "789ABCEFGKLMNOPQRSUVWXYZ", 0 }, > > > { "D5", "789ABCEFGKLMNOPQRSUVWXYZ", 0 }, > > > { "D4", "789ABCEFGKLMNOPQRSUVWXYZ", 0 }, > > > + /* SmartUPS 900 */ > > > + { "7TD", "79ABCDEFGKLMNOPQRSUVWXYZcefgjklmnopqrsuxz", 0 > }, > > > /* SmartUPS 1250. */ > > > { "8QD", "79ABCDEFGKLMNOPQRSUVWXYZcefgjklmnopqrsuxz", 0 }, > > > >> > > > >> > > > >> > > > > > > -----BEGIN PGP SIGNATURE----- > > > Version: GnuPG v2.0.11 (GNU/Linux) > > > Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org > > > > > > iEYEARECAAYFAkn+AowACgkQMiyRSD9s+zV0oQCffFhtV0zs2InekhBrVey+fQ6o > > > EW0An12lictuhgsldN/Yhfh2oVeTxmeP > > > =9+Pn > > > -----END PGP SIGNATURE----- > > > ---------- Message transféré ---------- > From: "Konstantin 'Kastus' Shchuka" <[email protected]> > To: [email protected] > Date: Thu, 27 Nov 2008 19:16:52 -0800 > Subject: Re: [Nut-upsdev] patch for old APC Smart-UPS 600 > I am sorry to return to this old issue again. > > I discovered that my venerable SU-600 sometimes responds with other D codes > than I added to compat_tab already. I had to add 3 more codes there to > make it recognized properly by NUT. > > Here is the diff: > > --- nut-2.2.1.orig/drivers/apcsmart.h 2007-12-17 07:13:09.000000000 > -0800 > +++ nut-2.2.1/drivers/apcsmart.h 2008-11-27 18:56:36.292018933 -0800 > @@ -258,6 +258,9 @@ > /* CS 350 */ > { "5.4.D", "\1ABPQRSUYbdfgjmnx9", 0 }, > /* Smart-UPS 600 */ > + { "D9", "789ABCEFGKLMNOPQRSUVWXYZ", 0 }, > + { "D8", "789ABCEFGKLMNOPQRSUVWXYZ", 0 }, > + { "D7", "789ABCEFGKLMNOPQRSUVWXYZ", 0 }, > { "D6", "789ABCEFGKLMNOPQRSUVWXYZ", 0 }, > { "D5", "789ABCEFGKLMNOPQRSUVWXYZ", 0 }, > { "D4", "789ABCEFGKLMNOPQRSUVWXYZ", 0 }, > > Thanks, > -Kastus > > On Fri, Nov 24, 2006 at 08:43:09PM -0800, Konstantin 'Kastus' Shchuka > wrote: > > Hi there, > > > > I am using an old (really old) APC Smart-UPS 600. It worked fine > > under apcupsd but when I tried NUT it did not work. > > > > The error I was getting was: > > > > sudo /lib/nut/apcsmart -DDD /dev/ttyS1 > > Network UPS Tools (version 2.0.4) - APC Smart protocol driver > > Driver version 1.99.8, command table version 2.0 > > debug level is '3' > > Attempting firmware lookup > > Firmware: [D4] > > Not found in table - trying normal method > > APC - Attempting to find command set > > APC - Parsing out command set > > Unable to split APC version string > > Bailing out > > > > I tried running commands manually from minicom, and indeed, the UPS > > was returning D6, D5, or D4 in response to "b" command. I still do not > > understand the inconsistency, but I have observed these 3 strings at > least. > > > > I came up with the following patch to apcsmart.h: > > > > --- nut-2.0.4.orig/drivers/apcsmart.h > > +++ nut-2.0.4/drivers/apcsmart.h > > @@ -254,6 +254,10 @@ > > /* APC600 */ > > { "6QD", "79ABCDEFGKLMNOPQRSUVWXYZcefgjklmnopqrsuxz", 0 }, > > { "6TI", "79ABCDEFGKLMNOPQRSUVWXYZcefgjklmnopqrsuxz", 0 }, > > + /* Smart-UPS 600 */ > > + { "D6", "789ABCEFGKLMNOPQRSUVWXYZ", 0 }, > > + { "D5", "789ABCEFGKLMNOPQRSUVWXYZ", 0 }, > > + { "D4", "789ABCEFGKLMNOPQRSUVWXYZ", 0 }, > > /* CS 350 */ > > { "5.4.D", "\1ABPQRSUYbdfgjmnx9", 0 }, > > > > I understand that it is a clumsy way to make it work but it was the > easiest > > for me. > > > > I am not sure how many more old Smart-UPS 600 are still in use and if > it's > > worth including into NUT. > > > > Thanks, > > -- > > Kastus Shchuka > >
_______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
