Greg, 2009/5/26 Arnaud Quette <[email protected]>
> Hi Greg, > > 2009/5/21 Greg <[email protected]> > >> Hi Arnaud, >> >> Any luck with the latest subversion trunk? >> > > sorry for the lag... too many things, not enough time. > > I'm preparing a version with some more debug info, but I'm still puzzled > with your issue. > in the meantime, can you retry the debug test on your 9.04, ie > > export USB_DEBUG=3 && /lib/nut/bcmxcp_usb -u root -DDDDD -a PowerWare > > if you end up with "Can't set POWERWARE USB configuration", then we should > have an msg from libusb like "could not set config..." with the exact > errno... > I missed to add that I'm also interested in this one: "unset USB_DEBUG && lsusb -d06da:0002 -v" on your 9.04. I can't find it back in the thread. @Kjell: do you see anything that could lead to that kind of "regression"? I'm not sure that it's on our side though. @Greg: can you fill the following and perhaps do some more testing (note that you only need to exec the driver): - is 2.2.2 working on 9.04? (simply get the source, configure using the instructions at the bottom of this mail and then compile as usual) - is 2.4.1 working on 8.10? - I would need more tech info on your qnap (arch, linux version, libusb version, USB path ie /proc or /dev, verbose lsusb as told above) * configure line ---------------------- configure --prefix=/usr \ --exec-prefix=/ \ --sysconfdir=/etc/nut \ --mandir=/usr/share/man \ --libdir=/lib \ --includedir=/usr/include \ --without-all \ --enable-static \ --with-statepath=/var/run/nut \ --with-altpidpath=/var/run/nut \ --with-drvpath=/lib/nut \ --with-pidpath=/var/run/nut \ --datadir=/usr/share/nut \ --with-pkgconfig-dir=/usr/lib/pkgconfig \ --with-user=nut --with-group=nut
_______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
