On Wed, May 27, 2009 at 1:10 AM, Leslie Rhorer <[email protected]> wrote: > OK, can someone tell me what utterly moronic thing I am doing wrong? > > I have two roughly identical Linux system running NUT, and one works > properly. The other almost does. The second system works well once > everything is up, but after booting, the system does not have connectivity > to the UPS.
What do the logs say? > I have to manually run `upsdrvctl start backup`, > `/etc/init.d/nut start`, and `upsd` to get NUT working. Thereafter it works > fine, whether anyone is logged in or not. After a boot, however, I have to > log in and kick-start it again. Interesting, most systems are set up such that '/etc/init.d/nut start' will run upsdrvctl and upsd. To restart, does it suffice to only run '/etc/init.d/nut start'? > What am I missing? The S50nut symlink is in /etc/rc2.d, and both > systems are at runlevel 2. I set up the systems the very same way (as far > as I can remember or tell), except that one employs driver = tripplite_usb > in usb.conf and the other uses driver = usbhid-ups, plus the two have > different backup names. Otherwise, I think everything is the same. One thing you can do to catch any subtle differences is to tar up the /etc/nut directory on one machine, then extract it into /tmp on the other machine, and use 'diff -Naur /etc/nut /tmp/nut' or whatnot. -- - Charles Lepple _______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
