On Jun 6, 2009, at 7:19 AM, Manuel Wolfshant wrote:
On 06/06/2009 03:27 AM, Charles Lepple wrote:
On Fri, Jun 5, 2009 at 2:15 PM, Dianne
Yumul<[email protected]> wrote:
Hello,
We have a Tripplite SMART1500RMXL2U and nut-2.2.0-6.el5 installed
on Centos
5.3. I've been unsuccessful on getting upsmon to work.
usdrvctl seems to start despite some warnings/errors:
# upsdrvctl start smart1500
Network UPS Tools - UPS driver controller 2.2.0-
Network UPS Tools - Tripp Lite OMNIVS and SMARTPRO driver 0.11.1
(2.2.0-)
Warning: This is an experimental driver.
Some features may not function correctly.
Detected a UPS: TRIPP LITE/ Tripp Lite SMART1500RMXL2U
libusb_get_interrupt() returned -110 instead of 8
libusb_get_interrupt() returned -110 instead of 8
libusb_get_interrupt() returned -110 instead of 8
[...]
At some point between 2.2.0 and 2.4.1, a retry count was increased,
which would reduce the number of timeout (-110) errors. Also, in
recent versions, the "unit.id" setting is not retrieved if you are
using Protocol 4.
ups.status:
The "ups.status" value is problematic - it should include at least OL
or OB. Not sure whether it is due to Protocol 4-related changes, or
the aforementioned timeout.
I start upsmon anyways but get the following, I lose
communication immediately.:
Client [email protected] logged into UPS [smart1500]
Communications with UPS smart1...@localhost lost
Is this because the protocol is unknown? I found stuff on the
archive and
changelog that indicate it may be fixed on nut-2.4.1, but I can't
find any
rpms for Centos 5.3. Is there an easier way than building an rpm?
It may not be too hard to modify the RPM file to use the NUT 2.4.1
source tarball instead of 2.2.0.
A couple of days ago I have modified a bit and recompiled the
src.rpm from fedora rawhide (2.4.1) in order to make it work on
Centos 5.3.
The modified source rpms as well as the binaries as built by me
are available from http://wolfy.fedorapeople.org/nut. It also
requires newer versions of libcurl (which is also used by php so if
you have php on the same system, you might need to either recompile
either nut or php ) and powerman. The packages also need libssh2
from Centos-extras. The whole stack has been successfully installed
by the friend for whom I recompiled the packages.
Feel free to get in touch with me directly if you need help with
these packages. However please ask on this list any nut-related
question, I am acting just a packaging monkey wrt to nut.
I just want to thank everyone for their help. Thanks to Manuel for
providing the rpms, I hope to install it later this week.
Dianne
_______________________________________________
Nut-upsuser mailing list
[email protected]
http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
