> Hi all, Hi Greg, > I've got a Powerware 5110 UPS that I'm trying to set up with nut in > Ubuntu. I've installed nut and configured the first two files: > > $ cat /etc/nut/nut.conf > MODE=standalone > $ cat /etc/nut/ups.conf > [pw5110] > driver = bcmxcp_usb > port = auto > # port = /dev/bus/usb/002/002 Yes the port should be auto. And if you use the latest libusb you should have a device at /dev/bus/usb/002/002 that you have found.
> When I try to test this configuration with the following command: > $ sudo upsdrvctl start pw5110 > Network UPS Tools - UPS driver controller 2.4.1 > Network UPS Tools - BCMXCP UPS driver 0.21 (2.4.1) > USB communication subdriver 0.17 > Can't set POWERWARE USB configuration > Unable to find POWERWARE UPS device on USB bus > To make a real test that it read the usb you can do the following. Set libusb debug to 3. sudo export LIBUSB_DEBUG=3 Then run the driver in debug (not by upsdrvctl). sudo /path/to/bcmxcp_usb -DD -u -a pw5110 Now it should spit out some info. You end it by ctrl-c. Report back and we can have a look. We may have a bug here, but it is not confirmed as our tests does not reveal it. /Kjell _______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
