Hi friends. Package: nut Version: 2.4.1-1 Depends: libusb, openssl, neon, libgd, net-snmp Status: install user installed Section: admin Architecture: mipsel maintainer: NSLU2 Linux <[email protected]> MD5Sum: c8c55a6021fea2b5f194ce4623eb2dfe Size: 1246363 Filename: nut_2.4.1-1_mipsel.ipk Source: http://eu1.networkupstools.org/source/2.4/nut-2.4.1.tar.gz Description: Network UPS tools. ------------------------------------------ Startup log: Jul 6 22:00:19 rc.unslung: start service /opt/etc/init.d/S50ups Jul 6 22:00:21 usbhid-ups[170]: Startup successful Jul 6 22:00:21 upsd[173]: /opt/etc/upsd.conf is world readable Jul 6 22:00:21 upsd[173]: listening on 127.0.0.1 port 3493 Jul 6 22:00:21 upsd[173]: listening on 192.168.1.1 port 3493 Jul 6 22:00:21 upsd[173]: /opt/var/state/ups is world readable Jul 6 22:00:21 upsd[173]: Connected to UPS [ups]: usbhid-ups-ups Jul 6 22:00:21 upsd[173]: /opt/etc/upsd.users is world readable Jul 6 22:00:21 upsd[174]: Startup successful ------------------------------------------ Ok ------------------------------------------ $upsc usb battery.charge: 100 battery.charge.low: 10 battery.charge.warning: 50 battery.mfr.date: 2007/11/18 battery.runtime: 2940 battery.runtime.low: 120 battery.temperature: 34.2 battery.type: PbAc battery.voltage: 27.3 battery.voltage.nominal: 24.0 driver.name: usbhid-ups driver.parameter.pollfreq: 30 driver.parameter.pollinterval: 2 driver.parameter.port: /dev/usb/hiddev0 driver.version: 2.4.1 driver.version.data: APC HID 0.93 driver.version.internal: 0.34 input.voltage: 216.0 output.voltage: 216.0 output.voltage.nominal: 220.0 ups.beeper.status: disabled ups.delay.shutdown: 20 ups.firmware: 652.18.I ups.firmware.aux: 7.3 ups.load: 26.0 ups.mfr: American Power Conversion ups.mfr.date: 2007/11/18 ups.model: Smart-UPS 1000 ups.productid: 0002 ups.serial: AS0746224745 ups.status: OL ups.test.result: No test initiated ups.timer.reboot: -1 ups.timer.shutdown: -1 ups.vendorid: 051d ------------------------------------------ Ok. But, to switch off the electric power After 20 min: ------------------------------------------ $upsc usb ..skip... battery.charge: 100 battery.temperature: 36.8 battery.voltage: 23.9 input.voltage: 0.0 output.voltage: 220.4 ups.load: 24.7 ups.status: OL ...skip... ------------------------------------------ The ups.status and battery.charger have not changed the value. battery.voltage, ups.load, battery.temperature adequately react.
After restoration electric power: ------------------------------------------ $upsc usb ..skip... battery.charge: 52 battery.temperature: 39.1 battery.voltage: 26.2 input.voltage: 217.4 output.voltage: 217.4 ups.load: 26.6 ups.status: OL ...skip... ------------------------------------------ The battery.charge and input.voltage show correct values. P.S. Probably the driver not truly reads out a condition my ups. _______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
