Begin forwarded message:
From: James Erickson <[email protected]>
Date: August 10, 2009 2:50:52 PM EDT
To: Charles Lepple <[email protected]>
Subject: Re: [Nut-upsuser] CyberPower OR2200
On Sun, Aug 09, 2009 at 06:38:32PM -0400, Charles Lepple wrote:
From: James Erickson
Date: August 9, 2009 6:17:51 PM EDT
To: Charles Lepple
Subject: Re: [Nut-upsuser] CyberPower OR2200
On Sun, Aug 09, 2009 at 03:46:26PM -0400, Charles Lepple wrote:
On Aug 9, 2009, at 12:01 PM, James Erickson wrote:
i own a CyberPower OR2200LCDRM2U and was wondering if any nut
drivers support this ups. none i have tried have worked although
usbhid-ups did tell me that the productid=0601 was not supported
yet. i see in the compatability list on the nut website that the
PR2200 is supported with the powerpanel driver but the OR2200 is
not
listed. i am interested in what i am doing wrong or if this is a
support issue. i will gladly post any requested data. thank you
for
your consideration in this matter.
Some useful bits of information:
* Your Linux (?) distribution and kernel version
* The version of NUT which you tried
Also, please send the output of 'lsusb -vvv -d :0601' to a file,
and
attach that to your reply.
Thanks!
Linux Distribution: Gentoo
Kernel Version: Linux-2.6.30-gentoo-r4
NUT Version: NUT 2.4.1-r1
Please find output of "lsusb -vvv -d :0601" attached.
Thank you very much.
odysseus ~ # lsusb -vvv -d :0601
Bus 001 Device 020: ID 0764:0601 Cyber Power System, Inc.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x0764 Cyber Power System, Inc.
idProduct 0x0601
bcdDevice 2.00
iManufacturer 3
iProduct 1
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 41
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xc0
Self Powered
MaxPower 50mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 0 No Subclass
bInterfaceProtocol 0 None
iInterface 0
** UNRECOGNIZED: 09 21 10 01 21 01 22 7b 02
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 1x 8 bytes
bInterval 10
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 1x 8 bytes
bInterval 20
cannot read device status, Connection timed out (110)
The HID descriptor is only 31 bytes long, which is probably too short
to contain the information needed by the usbhid-ups driver.
There is a possibility that this UPS is using some sort of USB-to-
serial adapter internally.
Do you have any details about what software is intended to be used to
monitor this UPS?
i contacted cyberpower systems and they stated the following about the
OR2200LCDRM2U:
The OR2200LCDRM2U is a native USB device and does not utilize any
adapters like our older UPS designs do. The USB port design in its
most
basic form should be the same as the 685AVR, 800AVR, and AE550 that
are
listed as compatible with the NUT usbhid-ups driver. If you need any
additional information I would be happy to try to obtain it from our
software/firmware group. If you can let me know precisely what he
needs
I will see if I can obtain it.
Regards,
Joel Gerlach
Cyber Power Systems (USA), Inc.
877-297-6937 x7917
he can be contacted at [email protected] if you are interested in
obtaining more information about the software. or if you wish simply
let me know what you need and i will do my best to get the data for
you.
thank you.
best regards,
james erickson
[email protected]
_______________________________________________
Nut-upsuser mailing list
[email protected]
http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
