On Aug 10, 2009, at 9:40 PM, James Erickson wrote:
On Mon, Aug 10, 2009 at 07:35:51PM -0400, Charles Lepple wrote:
On Aug 10, 2009, at 2:50 PM, James Erickson wrote:
The OR2200LCDRM2U is a native USB device and does not utilize any
adapters like our older UPS designs do. The USB port design in its
most
basic form should be the same as the 685AVR, 800AVR, and AE550 that
are
listed as compatible with the NUT usbhid-ups driver. If you need any
additional information I would be happy to try to obtain it from our
software/firmware group. If you can let me know precisely what he
needs
I will see if I can obtain it.
I am not as familiar with the usbhid-ups driver, but you may have to
add "productid=0601" and "-u root" to the driver command line for
testing.
Let us know how that works, and we will either update the driver, or
try some other debug options.
attempted command line as follows:
odysseus ~ # upsdrvctl -DDDDD -u root start
Sorry I didn't explain this better. Passing a bunch of "-D" flags to
upsdrvctl increases the debug level of upsdrvctl, not the driver.
Network UPS Tools - UPS driver controller 2.4.1
Starting UPS: cyberpower
exec: /lib/nut/usbhid-ups -a cyberpower -u root
This is where I was being lazy - I didn't check what system you were
using, so I didn't have the path handy.
Please run "/lib/nut/usbhid-ups -a cyberpower -u root -x
productid=0601", and if we need additional detail, we'll add a few
more "-D"s to the line. (The debug output can get unmanageable quickly.)
Network UPS Tools - Generic HID driver 0.34 (2.4.1)
USB communication driver 0.31
This CyberPower device (0764:0601) is not (or perhaps not yet)
supported
by usbhid-ups. Please make sure you have an up-to-date version of NUT.
If
this does not fix the problem, try running the driver with the
'-x productid=0601' option. Please report your results to the NUT
user's
mailing list <[email protected]>.
No matching HID UPS found
Driver failed to start (exit status=1)
odysseus ~ #
my /etc/nut/ups.conf reads as follows:
MONITOR cyberpo...@odysseus 1 upsmonuser 090660 master
[cyberpower]
driver=usbhid-ups
-x productid=0601
port=auto
is this a sane configuration?
Almost - in ups.conf you don't need the -x flag, just key=value pairs:
[cyberpower]
driver=usbhid-ups
productid=0601
port=auto
_______________________________________________
Nut-upsuser mailing list
[email protected]
http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
