I have setup nut-2.4.1 with the bcmxcp driver for my HP R3000 XR unit and although it appears to work, I receive the following sorts of errors in syslog:
Aug 27 10:33:05 sv18 bcmxcp[6373]: Communications with UPS lost: Receive error (data): got 0 bytes instead of 64!!! Aug 27 10:33:15 sv18 bcmxcp[6373]: Communications with UPS lost: Receive error (data): got 0 bytes instead of 64!!! Aug 27 10:38:57 sv18 bcmxcp[6373]: Communications with UPS lost: Receive error (data): got 0 bytes instead of 64!!! Aug 27 10:40:04 sv18 bcmxcp[6373]: Communications with UPS lost: Receive error (Request command): 0!!! Aug 27 10:43:38 sv18 bcmxcp[6373]: Communications with UPS lost: Receive error (Request command): 0!!! After about 15 hours the driver exits and has to be restarted. Here is my ups.conf: [ups2] driver = bcmxcp port = /dev/ttyS1 desc = "HP R3000 XR" baud_rate = 19200 The system is running Slackware Linux 12.1 and nut was built from source. Any ideas? Thanks, David
_______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
