Hi Brian 2009/8/18 Brian Hoover <[email protected]>
> Hello, > > > > This email is regarding a link someone sent me to a page describing how to > communicate to an APC power supply. > > > > http://eu1.networkupstools.org/protocols/apcsmart.html > > > > I realize you aren’t the owner of the content rkroll is but his contact me > link is dead. I got my UPS working just fine so this isn’t a help me > email. I just wanted to mention a few things that could be updated on the > page. I have a APC model 2200 and to communicate with it serially I needed > to have the following config on my COM port: 2400 bps/8N1 with a flow > control of Xon/Xoff. The link above does not mention that last part. > > > > Another thing I learned is that for me at least, my UPS wouldn’t talk to me > at all until I sent it the “Y” command. I must send this every time the UPS > is turned off and then back on, or else it will return no communication. > > > > Didn’t know if you wanted to add this information to that page or confirm > it to anyone else. Thanks again. > do you mean that you have problems running the apcsmart driver? cheers, Arnaud -- Linux / Unix Expert R&D - Eaton - http://www.eaton.com/mgeops Network UPS Tools (NUT) Project Leader - http://www.networkupstools.org/ Debian Developer - http://www.debian.org Free Software Developer - http://arnaud.quette.free.fr/
_______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
