I did get this ups working with nut with tripplite_usb. Not exactly sure what fixed it. I think I had to specify the bus number in ups.conf.
All is well now. I thank everyone for their time. Charles Lepple <[email protected]> writes: >Correct me if I am wrong, but for the Tripp Lite vendor ID (09AE), >there are two categories for the product ID: > > - 0001: use tripplite_usb (which is the Tripp Lite serial protocol >stuffed over USB HID) > > - anything else: use usbhid-ups (which is HID Power Device Class) > >The information that Chris and Leslie posted refers to PID 0001. > >Note that the USB PID is completely separate from the >"ups.firmware.aux" protocol number that tripplite_usb lists (which >also has four digits). > >Hope that clears things up a bit. _______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
