Hi Kjell,
--------------------------------------------------
From: "Kjell Claesson" <[email protected]>
Sent: Saturday, October 10, 2009 7:41 PM
To: <[email protected]>
Cc: "Greg" <[email protected]>; "Arnaud Quette" <[email protected]>;
"Thomas Zulliger" <[email protected]>; "Greg Vickers"
<[email protected]>
Subject: Re: [Nut-upsuser] Powerware USB issue solved (bcmxcp_usb)
Hi Greg,
Hi Arnaud,
I must be doing something wrong.
I pulled down revision 2015 and even browsed through
http://svn.debian.org/wsvn/nut/trunk/?rev=0&sc=0 and drivers/bcmxcp.c
shows driver version 0.22.
Yep, think that Arnaud missed to change the number.
But he should change the usb subdriver number to 0.18 instead.
The main numbering 0.22 is for the protocol part, that is the same for
usb and serial.
The changes was made to a included function file nut-usb, that have no
revision number. But it is only the usb part of bcmxcp that use this file.
I can't seem to pull down a file with version 0.23.
In my last post I ran from /usr/local/ups/bin/bcmxcp_usb but I had copied
the compiled file there.
Could you possibly explain what im doing wrong or even send me a tar file
of the source?
You can run the driver in debug mode directly from the build. So when you
have
compiled you can call /path/to/nut/drivers/bcmxcp_usb -DD -a<ups>.
The you don't have to move it for testing.
What is the outcome of the debug run ?
Same problems?
Yep same problems. Here is the output from the build directory...
============================================
[/share/Public/nut2.5/drivers] # ./bcmxcp_usb -DD -a qnapups -u admin
Network UPS Tools - BCMXCP UPS driver 0.22 (2.4.1)
USB communication subdriver 0.17
0.000000 debug level is '2'
0.006703 device 009 opened successfully
0.928340 Communications with UPS lost: Receive error (data): got 33
bytes instead of 116!!!
2.938432 Communications with UPS lost: Receive error (Request
command): COMMAND: 31
2.939556 RECONNECT USB DEVICE
5.978409 device 009 opened successfully
5.979697 Can't reset POWERWARE USB endpoint: could not clear/halt ep
129: Broken pipe
Unable to find POWERWARE UPS device on USB bus (USB)
Things to try:
- Connect UPS device to USB bus
- Run this driver as another user (upsdrvctl -u or 'user=...' in ups.conf).
See upsdrvctl(8) and ups.conf(5).
6.022613 Fatal error: unusable configuration
6.023582 CLOSING
======================================
Thanks,
Greg
/Kjell
__________ Information from ESET Smart Security, version of virus
signature database 4494 (20091009) __________
The message was checked by ESET Smart Security.
http://www.eset.com
__________ Information from ESET Smart Security, version of virus signature
database 4494 (20091009) __________
The message was checked by ESET Smart Security.
http://www.eset.com
_______________________________________________
Nut-upsuser mailing list
[email protected]
http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
