Ubuntu 8.04 Nut : Version: 2.2.1-2.1ubuntu7.2 Hello,
I choose the megatec driver and I connect through a serial cable. I receive a "This UPS has an unsupported combination of battery voltage/number of batteries" message. I know this is not an error but I don't really what I have to do next. Here is the result of /lib/nut/megatec -a infosec -DDD debug level is '3' Starting UPS detection process... Asking for UPS status [Q1]... Q1 => OK [(224.0 224.0 221.0 040 50.0 2.28 36.0 00000001] Asking for UPS status [Q1]... Q1 => OK [(224.0 224.0 221.0 040 50.0 2.28 36.0 00000001] Asking for UPS status [Q1]... Q1 => OK [(224.0 224.0 220.0 039 50.0 2.28 36.0 00000001] Asking for UPS status [Q1]... Q1 => OK [(223.0 223.0 221.0 039 50.0 2.28 36.0 00000001] Asking for UPS status [Q1]... Q1 => OK [(224.0 224.0 220.0 039 50.0 2.28 36.0 00000001] 0 out of 5 detection attempts failed (minimum failures: 2). Asking for UPS information [I]... I => FAILED [short read] I detail: (8 bytes) => 20 20 20 20 20 20 20 20 Megatec protocol UPS detected. Cancelling any pending shutdown or battery test. Asking for UPS power ratings [F]... F => OK [#220.0 027 240.0 50.0] Unsupported battery voltage (240.0V). This UPS has an unsupported combination of battery voltage/number of batteries. Cannot calculate charge percentage for this UPS. Done setting up the UPS. Thank you for your help. Chris
_______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
