The actual unit details (as per PowerAlert software and product specs): Manufacturer: Tripp Lite Model: SMX500RT1U Nominal Input Voltage: 230VAC Nominal Frequency: 50Hz VA Rating: 500VA Load Banks Controllable: 1 Load Banks Total: 2 Nominal Battery Voltage: 12VDC Battery Set: 2x 6VDC batteries Firmware Version: 3344 Rev 3
--- On Sun, 22/11/09, George Stratigis <[email protected]> wrote: > From: George Stratigis <[email protected]> > Subject: [Nut-upsuser] Tripp Lite SmartPro SMX500RT1U incompatibility > To: [email protected] > Date: Sunday, 22 November, 2009, 22:03 > Greetings to all, > > I recently connected a Tripp Lite SMX500RT1U unit to a > Synology NAS (basically a Marvell ARM equipped box running a > custom 2.6.24 Linux). I tried using the tripplite_usb driver > contained in nut 2.4.1 with not much luck. > > It does read the model ID and VA rating properly, but fails > at everything else - mains voltage (this is a 230VAC EU > model), battery config, unit status etc. Seems expected > though, since as reported, this model is using yet another > Tripp Lite protocol (3005). > > It also seems that quite frequently (approx 1s every 10), > communication to the UPS is lost and I am getting "data > stale" errors. I can't really say if it affects normal > operation. > > From what I understand, the tripplite_usb driver is > implemented by reverse engineering the UPS's responses to > certain commands. I could provide any debug and other info > needed to interpret protocol 3005. > > DiskStation> ./upsdrvctl -u root start > Network UPS Tools - UPS driver controller 2.4.1 > Network UPS Tools - Tripp Lite OMNIVS / SMARTPRO driver > 0.20 (2.4.1) > Warning: This is an experimental driver. > Some features may not function correctly. > Detected a UPS: TRIPP LITE/TRIPP LITE SMX500RT1U > Unknown input voltage range: 0x06 > Unknown number of switchable load banks: 0x01 > Unit ID: 0 > Unknown protocol (3005)Attached to Tripp Lite SMX500RT1U > Unknown value for s[1]: 0x01 > > DiskStation> ./upsc ups > battery.voltage.nominal: 0 > driver.name: tripplite_usb > driver.parameter.pollinterval: 2 > driver.parameter.port: auto > driver.version: 2.4.1 > driver.version.internal: 0.20 > input.voltage.nominal: 120 > ups.debug.0: 30 05 58 58 58 58 0d '0.XXXX.' > ups.debug.D: 00 e3 00 90 0d 00 00 '.......' > ups.debug.L: 14 00 00 07 58 58 0d '....XX.' > ups.debug.load_banks: 0 > ups.debug.M: 00 00 00 ed 0d 00 00 '.......' > ups.debug.P: 30 30 35 30 30 58 0d '00500X.' > ups.debug.S: 01 00 00 00 64 00 0d '....d..' > ups.debug.T: 2d 00 01 f4 00 58 0d '.....X.' > ups.debug.V: 06 00 0c 01 58 58 0d '....XX.' > ups.delay.shutdown: 64 > ups.firmware: F334403 > ups.firmware.aux: protocol 3005 > ups.id: 0 > ups.mfr: Tripp Lite > ups.model: SMX500RT1U > ups.power.nominal: 500 > ups.productid: 0001 > ups.status: > ups.vendorid: 09ae > > > > George > > > > > _______________________________________________ > Nut-upsuser mailing list > [email protected] > http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser > _______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
